Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Feature Summary

Rebar Group Setting [Shortcut command: RG]

Delete Rebar Group Setting [Shortcut command: DRG]

The Rebar Group Setting function is a function to select and express only the reinforcing bars representing the group among the grouped reinforcing bars.

Function Explanation

Generate Drawing > Style > Rebar Group Setting

  • After executing the Rebar Group Setting command, set the rebar to represent the rebar group in the order shown in the figure above. This setting takes precedence over the Group Rebar Type setting of Rebar Style.

Assuming that the group position of the reinforcing bar selected as a representative is the 10th, if the number of rebars becomes less than 10 through the model update, the settings are initialized.

Generate Drawing > Style > Delete Rebar Group Setting

Delete the representative rebar designation setting.

  • Object : Deletes only the settings of the selected reinforcing bar object.

  • View : Deletes the representative reinforcing bar settings of all reinforcing bar objects belonging to the selected view.

  • All : Deletes the representative reinforcing bar settings of all reinforcing bar objects in the current work space (based on the upper tap).

  • No labels