Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Summary

Edit the Slope Profile.

How to Run

[Model Mode]

  • Ribbon Menu > [Model] Tab > [Terrain] Group > Surface > Slope Profile

Explanation

Slope Profile Surface

Select the slope profile to edit.

  • [Select Slope Profile]
    Select the profile to edit.

When Cut Profile is Selected

Edit the cut profile.

  • [Edit Slope Profile]
    Edit the profile of the cut slope.

  • [Profile]
    The limit height and slopes of the generated profiles can be editted.

When creating a slope, if you selected a stratum to create it, you can modify it in the Additional Slope Tab.

  • You can change the slope value when creating the slope. Slope value corresponding to the strata.

When selecting Fill Profile

Edit Fill Profile.

  • [Edit Slope Profile]
    Edit the profile of the Fill Slope.

  • [Profile]
    The limit height and slopes of the generated profiles can be editted.

In the Fill Slope option, there is no option to modify the strata. This is because the Fill Slope is created above the surface. Changes to the Subsoil/Subgrade are done in the Subgrade Tab.

  • The slope can be modified if the subsoil/subgrade depth

Reference Materials

  • No labels