Summary
Edit the Slope Profile.
How to Run
[Model Mode]
Ribbon Menu > [Model] Tab > [Terrain] Group > Surface > Slope Profile
Explanation
Slope Profile Surface
Select the slope profile to edit.
[Select Slope Profile]
Select the profile to edit.
When Cut Profile is Selected
Edit the cut profile.
[Edit Slope Profile]
Edit the profile of the cut slope.[Profile]
생성된 단수의 한계 높이 및 사면 관련 항목을 편집할 수 있습니다.
Slope 생성 시 지층을 선택하여 생성하였으면 Additional Slope Tab에서 수정합니다.
Slope 생성시 설정한 Slope 값을 변경할 수 있습니다. 지층에 대응하는 Slope 값입니다.
Fill Profile 선택 시
Fill Profile을 편집합니다.
[Edit Slope Profile]
Fill Slope 의 Profile을 편집합니다.[Profile]
생성된 단수의 한계 높이 및 사면 관련 항목을 편집할 수 있습니다.
Fill Slope는 지층 관련 수정이 없습니다. 지표면 위로 생성되기 때문입니다. 노상/노체 관련 수정은 Subgrade Tab에서 수정합니다.
The slope can be modified if the subsoil/subgrade depth