Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Summary

2D/3D 요소 Chamfer

Related Function

Edit > Edit Shape > Chamfer Shape

Type

FAQ, TIP, EXAMPLE

Q. Solid의 Edge에 모따기/모깎기를 하고 싶습니다.

A. Edit 탭의 Edit Shape > Chamfer를 통해 해당 작업을 수행할 수 있습니다.

  • Solid 요소(1D Member, 2D Member, 3D Member 및 3D Body Type)의 edge에 대하여 모따기 또는 모깎기합니다. (Solid 요소의 개념 참조)

Generate Option / By Gizmo distance & By face offset

그림. 1 By face offset

그림. 2 By Gizmo / One Dir.

그림. 3 By Gizmo / Two Dir.

  • One Direction : 각 Face 동일 Chamfer Length 적용

  • Two Direction : 각 Face 별도 Chamfer Length 적용

  • 각 Face 동일 Chamfer Length 적용

  • Chamfer Length 임의 조정 가능

  • 각 Face 별도 Chamfer Length 적용

  • 각 방향별 Chamfer Length 임의 조정 가능

Rule of Chamfer Length By face offset

그림. 4 Effect of Chamfer length

a) perpendicular faces

b) obtuse angle faces

c) badly defined chamfer

그림. 5 Example Case

Rule of Chamfer Length By Gizmo distance

그림. 6 One Direction

그림. 7 Two Direction

  • No labels