Summary
Creates additional Main Constraint Path in the progress direction of the library space.
The start and end points of the Main Constraint Path are constrained to the Constraint Plane when created.
Execution
[Curve Library Mode]
Ribbon Menu > [Curve Library] Tab > [Constraint Entity] Group > Path
[Assembly Unit Mode]
Ribbon Menu > [Assembly Unit] Tab > [Constraint Entity] Group > Path > Main Path
Details
Create Curve Library Mode - Main Constraint Path
This feature adds a path in the direction of the library path (direction of Default Constraint Path).
[Constraint Plane]
Selects two or more constriant plane to set the location where to create the Main Constraint Path. A constraint path must be constrained to a constraint plane.[Offset]
Enters the separation distance from the Default Constraint Path to set the position of the Main Constraint Path.Distance (Path-Y) : Enter the separation distance in the Y-axis direction.
Distance (Path-Z) : Enter the separation distance in the Z-axis direction.
[Variable Path]
Activated when the Main Constraint Path is created in the Assembly Unit Mode, when this option is turned on, different separation distance values can be entered at the start and end points.[Path Variation]
Activated when the Main Constraint Path is created in the Assembly Unit Mode, this option sets the shape of the curve that connects the start and end points. Linear, quadratric and tertiary functions can be selected.
Create Assembly Unit Mode - Main Constraint Path
This feature adds a path in the direction of the library path (direction of Default Constraint Path).
[Constraint Plane]
Selects two or more constriant plane to create the Main Constraint Path.[Constraint Plane]
두 개 이상의 Constraint Plane을 선택하여 Main Constraint Path를 생성합니다. Constraint Path의 겨[Offset]
Enters the separation distance from the Default Constraint Path to set the position of the Main Constraint Path.Distance (Path-Y) : Enter the separation distance in the Y-axis direction.
Distance (Path-Z) : Enter the separation distance in the Z-axis direction.
[Variable Path]
Activated when the Main Constraint Path is created in the Assembly Unit Mode, when this option is turned on, different separation distance values can be entered at the start and end points.[Path Variation]
Activated when the Main Constraint Path is created in the Assembly Unit Mode, this option sets the shape of the curve that connects the start and end points. Linear, quadratric and tertiary functions can be selected.