Summary | Rigid Path에 거더 할당 후 Assembly Unit이 Layout에 할당되지 않습니다. |
---|---|
Related Function | Information-Based 3D Modeling > Constraint Entity(Path)의 이해 > Constraint Path의 특성 및 활용 |
Type | TIP, VERIFICATION |
Q : Rigid Path에 거더 할당 후 Assembly Unit이 Layout에 할당되지 않습니다.
A : 거더 배치 기준 (Coincident Point)를 거더 끝 점이 아닌 교량받침의 위치로 하여 Property를 변경합니다.
먼저 CIM에서는 Constraint Path가 상위 모드에 할당 시 입력 정보를 바탕으로 경로를 재생성합니다.
Constraint Path 가운데 Rigid Path의 경우 기존 Constraint Path에 종속되어 재생성되는 특정 길이를 유지하는 직선 경로입니다.
그림. 1 Rigid Path Concept 및 선형 할당
따라서, Rigid Path가 상위 모드에 할당될 때 Rigid Path의 재생성에 영향을 미치는 Coincident Point에 대한 2개의 Length 입력 정보가 중요합니다.