...
[Point Library Mode] / [Curve Library Mode] / [Assembly Unit Mode]
Explanation
...
By Plane entry route location
...
By Plane (2D View) | Commentary contents |
|---|
Base Mode [By Plane]  | |
Library Mode [By Plane]  | |
...
How to use By Plane (2D View).
...
By Plane (2D View) | Commentary contents |
|---|
 | Run CAD ID
If you click the OK or Apply button after defining the By Plane function, this function calls up the CAD ID immediately.
This option is only available in Base Mode. Classification
Defines the name of the cross section created with By Plane (2D View).
|
 | |
 | [Reference]
How to set up the Define Plane, the direction of the reference point (Z direction) where the cross section is created may be important depending on the target object to be drawn.
A common method of using 3 Points is to set the View Box in the direction the user wants.
1 Point : This is the origin where the View Box will be located.
2 Point : This is the reference point that determines the X direction among the three axes of X, Y, and Z.
3 Point : It is the reference point that determines the Y direction among the three axes of X, Y, and Z.
Therefore, the direction of the 1 Point reference point is determined in the Z direction.
 |
 | | Info |
|---|
The By Plane function in Library mode goes through the process of selecting a Constraint Point. In CIM, the Constraint Point serves as a constraint point when linking sections, and when creating a cross section linked to a higher mode, the constraint point can be remembered and the cross section can be created at the same location. Therefore, in Library mode, be sure to create a Constraint Point before setting the Drawing View. |
|
 | View Depth
When the Define Plane is applied, a View Box containing the cross-section information will appear.
At this time, the visible range of the cross section, including the depth in front and behind the cross section, is defined.
Objects included in the visible range are included in cross-section information and are used for drawing information in CAD ID. How to use
The default setting for View Depth is set to 2.0m front and rear, and you can change the size of the View Box by dragging the arrow that appears in the View Box or entering a value directly.
|
 | Cutting Area
Like View Depth, when Define Plane is applied, a View Box containing cross-section information appears.
It defines the visible range of the cross section, including the width and height of the cross section.
Objects included in the visible range are included in cross-section information and are used for drawing information in CAD ID. How to use
The width of the Cutting Area is set to 2.0m and the height is 5.0m by default.
You can change the size of the View Box by dragging the arrow that appears in the View Box or directly entering a value.
|
 | Option Clipping plane
As a graphic effect, if the option based on the view box is activated, surrounding structures appear together.
If you clear the option, only the View Box will be visible. Auto Dimmension [CAD ID]
If you activate the option, this is a function that automatically creates structure dimensions when linking 2D View sections.
For detailed effect description, please check the reference link below.
View Auto Dimension
|
CAD 01_By Plane(EN).mp4 | ① Check function location in Base Mode ② Use of functions in Library Mode ③ Define Plane ④ View Box size adjustment (View Depth and Cutting View) ⑤ CAD ID drawing (cross-section) information linking |
...
