Summary
EditEditing the Slope Profile individually or collectively.
How to Run
[Model Base Mode]
Ribbon Menu > [Model] Tab > [Terrain] Group > Surface > Slope Profile[Slope] Group > Modify
Explanation
Selecting the Type of the Slope Profile
.
[Select Slope Profile]
Select the profile to editSelecting the Slope Profile.
Info |
---|
When |
Edit the cut profile.
[Edit Slope Profile]
Edit the profile of the cut slope.[Profile]
The limit height and slopes of the generated profiles can be editted.
Info |
---|
When creating a slope, if you selected a stratum to create it, you can modify it in the Additional Slope Tab. |
You can change the slope value when creating the slope. Slope value corresponding to the strata.
When selecting Fill Profile
Edit Fill Profile.
[Edit Slope Profile]
Edit the profile of the Fill Slope.[Profile]
The limit height and slopes of the generated profiles can be editted.
Info |
---|
In the Fill Slope option, there is no option to modify the strata. This is because the Fill Slope is created above the surface. Changes to the Subsoil/Subgrade are done in the Subgrade Tab. |
single profile is selected, all information about the profile is displayed in a table. |
[Slope Preset]
Importing pre-defined Slope Preset information.
Info |
---|
With the information imported through a pre-defined Preset, individual or collective modifications can be made to the selected Slope Profile. |
[Preview]
Preview the slope profile to be modified.