Versions Compared

Old Version 2

changes.mady.by.user 이혜연

Saved on

compared with

New Version Current

changes.mady.by.user 박상렬(Dwayne)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Summary

...

Table of Contents

Summary

...

  • This is the function to define the 2D view section of Section / Plan / Side based on the CIM 3D model assigned to the alignment in Base Mode.

    In particular, it is specialized in the function of continuously creating sections at regular intervals based on a alignment, and an earthwork quantity table can be additionally created from CAD ID by using the section created with By Layout.

How to Run

...

  • Base Mode [By Layout]

    • Ribbon Menu > [Application] Tab > [Drawing] Group > Drawing view > By

...

    • Layout

Explanation

Method to Define Drawing View By Layout

Image Removed

...

[Run Drafter]
Set whether to run Drafter automatically when setup is complete.

...

How to use By Layout define a cross section

This is the process of defining a cross section to be drawn with a CAD ID so that the cross section can be created using the By Layout function.

By Layout (2D View)

Commentary contents

image-20240712-032531.pngImage Added

  • [Execute]
    The By Layout function in Base Mode can be executed in the Drawing view of the [Drawing] group under the [Application] tab.

Info

The condition for executing the function is that the model must be assigned to the Base Mode with the layout.

image-20240712-065037.pngImage Added

  • Run CAD ID
    If you click the OK or Apply button after defining the By Plane function, this function calls up the CAD ID immediately.

  • View Type
    Determine the view type.

...

[Classification]
Define the view name.

  • [Auto Name] Apply name of the view based on rules set below when defining multiple views.

  • [Prefix] Define the name used in the beginning of the Auto view name.

  • [Preset] Define the rules for the end of the Auto view name.

  • [Postfix] Define the name used in the end of the Auto view name.

  • [Name] Previews the Auto view name determined by the above rules.

...

[Define Section View]
Select a method to define the view.

  • [By 1Point] LDefine the view section by selecting one point above the layout.

  • [By Segment] Define the view section in the selected segment.

  • [By layout] Define the view section in the selected layout.

    • [View Point] BSpecify the view point location under By Segment or By Layout.

      • [Method] Determine the method to position the viewpoint.

        • [By Ratio] The viewpoint is added or modified by specifying the ratio value in the selected layout.

        • [By Length] The viewpoint is added or modified by specifying the length in the selected layout.

        • [By Division] Create a viewpoint that divides by the number of divisions for the selected layout.

...

[View Depth]
Define the visibility range that includes the front and rear of the section.

...

[Cutting Area]
Define the section size.

...

[Rotation Narmal Direction]
Set the view angle in the normal direction of the layout direction.

Reference Materials

...

  • You can define a 2D View section by dividing it into Section / Plan / Side.

image-20240715-042048.pngImage Added

  • Classification

    • Auto Name
      If the option is activated, when defining multiple cross sections, the names of the cross sections are automatically serialized according to the preset settings.

    • Prefix
      Defines the name used at the beginning of the name of the section.

    • Preset
      Select an ending rule with a preset name.

      image-20240712-065242.pngImage Added

    • Postfix
      Defines the starting point of the name end of the section.

    • Name
      It shows in advance the name of the cross section that will be determined through the above rules.

      • Depending on the Preset setting, select a number format such as 1-1 / -1 and then enter a number in Postfix. A name that is a combination of Prefix and Postfix will appear.

        image-20240715-041948.pngImage Added

      • Depending on the preset settings, select an English format such as A-A / a-a / -A / -a and then enter numbers from 1 to 24 in Postfix, and the name will be displayed in alphabetical order.

        image-20240715-042010.pngImage Added

image-20240715-042658.pngImage Added

  • Define Path
    Choose a method for defining the view.

    • By 1Point
      Pick a point on the layout to define the section view.

image-20240715-071325.pngImage Added

  • Define Path
    Choose a method for defining the view.

    • By Segment
      Select Segment to define the section view.

    • By Layout
      Select Layout to define the section view.

  • Alignment
    When Segment and Layout are selected, Parallel and Tangential Types where the cross-sectional configuration is parallel or orthogonal are supported.

  • View Point
    Specify the view point location when By Segment or By Layout is selected.

    • Method : Determines how to position the view point.

      • By Ratio
        When Segment and Layout are selected, enter the Ratio value to Add or Modify the section view.

      • By Length
        When Segment and Layout are selected, enter the length value to Add or Modify the section view.

        • Start / End Offset : Enter the distance to separate from the start or end point of Segment and Layout.

        • Interval Length : Enter the length value to repeat.

      • By Division
        When Segment and Layout are selected, a cross-sectional view is created that divides the number of divisions entered.

      • User Defined
        When Segment and Layout are selected, a cross-sectional view is created by applying the length value entered by the user.
        When entering consecutive values, you can apply the repetition symbol “@” and the “,” symbol to define the next value.
        Example) 5@10, 5 m

image-20240715-072154.pngImage Added

  • View Depth
    Define the visible range in front and behind the section view.

  • Cutting Area
    Defines the size of the cross section.

  • Rotation Narmal Direction
    Set the section view angle to the normal direction of the layout progress direction

CAD 02_By Layout(EN).mp4

  • Video using the By Layout function

① Executing functions in Base Mode

② Define section name

③ Define Path: Select By Layout

④ Specify the position of the cross section

⑤ View Box size adjustment (View Depth and Cutting View)

⑥ CAD ID drawing (cross-section) information linking

Reference Materials

...

  • Using the By Layout section created in CIM, you can create an Earthwork quantity table that can be used in drawings from CAD ID.
    Reference Manual: CAD ID Create Cross Section View