Table of Contents |
---|
Summary
...
...
This is the function to define a 3D section to be created as a drawing based on the CIM 3D model.
The section defined as 3D View can be drawn by linking the cross section information with MIDAS CAD INFRA-DESIGN (CAD ID).
How to Run
...
Base Mode
Ribbon Menu > [Application] Tab > [Drawing] Group > Drawing view >3D View
[Point Library Mode] / [Curve Library Mode] / [Assembly Unit Mode]
Ribbon Menu > [Library] Tab > [Drawing] Group > 3D View
Explanation
...
...
[Run CAD ID]
Set whether to automatically run CAD ID according to 3D View saving.
...
[Classification]
Enter the name of the 3D View.
...
...
3D View entry route location
This is the process of creating a 3D view section using the CIM-3D View function.
The 3D View function is provided in each Library Mode, including Base Mode.
Using this function, you can create a 3D section that can be used as a drawing depending on the purpose from all models in the Library.
The explanation below explains the 3D View entry path in Base Mode and the 3D View entry path in Library Mode.
3D View | Commentary contents |
---|---|
Base Mode [3D View] |
|
Library Mode [3D View] |
|
...
How to use 3D View.
This process defines a section to be drawn using a CAD ID, enabling creation with the 3D View function.
The 3D View section's configuration can be adjusted by simultaneously pressing [Ctrl + Mouse Wheel] to change the model's position visible on the workspace screen.
|
...
|
...
|
...
|
...
Modfiy : Modifies the data of the selected 3D View.
...
Delete : Delete the selected 3D View.
...
| |
|