Versions Compared

Version Old Version 3 New Version Current
Changes made by

이근협 (Axel)

박상렬(Dwayne)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Summary

  • In Drafter, the section to be reated as a drawing is defined through a curve, and a plan drawing is created for the surface.

How to Run

Table of Contents

Summary

...

  • The longitudinal cross section (Elevation) of a structure, which is one of the components of a drawing, is expressed by straightening it.
    By Curve is a function that creates a cross section by automatically straightening a curved horizontal linear map or longitudinal cross section (Elevation).
    The name of the function commonly used in CIM is called Curved Drawing.

 

How to Run

...

  • Base Mode [By Layout]

    • Ribbon Menu > [Application] Tab > [Drawing] Group > Drawing view > By Curve

 

Explanation

Method to Define Drawing View By Curve

Image Removed

...

[Run Drafter]
Set whether to run Drafter automatically when setup is complete.

...

[Classification]
Define the view name.

...

How to use By Curve (Curved Drawing).

This process defines a cross section so that an elevation drawing can be drawn using a CAD ID with the By Curve function.

By Curve (2D View)

Commentary contents

image-20240715-225211.pngImage Added

  • [Execute]
    The By Curve function in Base Mode can be executed in the Drawing view of the [Drawing] group under the [Application] tab.

Info

The condition for executing the function is that the model must be assigned to the Base Mode with the layout.

image-20240715-234339.pngImage Added

  • Run CAD ID
    If you click the OK or Apply button after defining the By Curve function, this function calls up the CAD ID immediately.

  • Classification
    Defines the name of the cross section created with By Curve.
    The default name is “Curved Section 1”.

image-20240715-234448.pngImage Added

  • Select Target
    Select objects by type to

...

[Define Path]
Specify the path to use as a reference for the surface plan.

  • By Layout : Specify a segment or layout as path.

  • By Select : Specify a single wire object as path.

...

[View Setting]
Set the view for the flattened surface.

  • Plane Direction : Specify the plane diretion of the surface plan .

  • Sectioning Angle : Specify the sectioning angle for the flattened surface. Smaller value increases precision, but reduces performance.

  • Activate Depth : Enables/disables the visibility range other than the section in the surface plan.

Reference Materials

...

  • be added to the cross section to be created with By Curve.

    • Member
      Concrete and steel objects can be filtered and selected.

    • Rebar
      Rebar objects can be filtered and selected.

    • Tendon
      Tendon objects can be filtered and selected.

    • Terrain Surface
      Ground Surface and Boring Surface model objects can be filtered and selected.

    • Slope Surface
      Fill & Cut Slope model objects can be filtered and selected.

image-20240716-000807.pngImage Added

  • Define Path
    Specifies the path that serves as the basis for By Curve (Curved Drawing).

    • By Layout
      Specifies Segment or Layout as the path.

    • By Select
      Specifies a single Wire (Line) object as the path.

image-20240716-000826.pngImage Added

  • View Setting
    Set the flattened section of By Curve (Curved drawing).

    • Plane Direction
      Specifies the direction of the cross section for the Curved drawing.

    • Sectioning Angle
      Defines the angle used to divide the Curved drawing.
      Smaller values increase precision but may affect performance.

    • Activate Depth
      Option to display objects within the visible range centered on the Define Path, including the elevation section.

CAD 03_By Curve(EN).mp4

  • Video using the By Curve function

    ① Executing functions in Base Mode

    ② Select objects to be included in the cross section (Select Concrete, Terrain, Cut & Fill Model)

    ③ Select Define Path type : By Layout

    ④ Activate View Setting option

    ⑤ CAD ID drawing (cross-section) information linking

Reference Materials

...

  • By using the By Curve (Curved drawing) cross section created in CIM, you can create a Longitudinal Profile Table in CAD ID that can be used in drawings.
    Reference Manual: CAD ID Longitudinal Profile Table