Versions Compared

Old Version 1

changes.mady.by.user 임익주(Lawrence)

Saved on

compared with

New Version Current

changes.mady.by.user 임익주(Lawrence)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

개요

  • Assign the Point Library based on layout stations.

실행

  • [Base Mode]

    • Ribbon Menu > [Lab] Tab > Assign by Layout

설명

Point Library Assign (By Layout)

Assign the Point Library based on layout stations in Base mode

  • [Select Point Library]
    Select the Point Library to assign.

  • [By Layout]
    Select the Layout to assign.

  • [Initial Station]
    Enter the layout station where you want to assign the Point library.

  • [Rotation]
    Enter the rotation angle.

Expand
titleDetailed Explanation (Rotation)

  • [Horizontal Offset], [Vertical offset]
    Enter the vertical and horizontal offset distance.

  • [Alignment]
    Sets the calculation method for the location to place the Point Library when the library is assigned to the layout.

Expand
titleDetailed Explanation (Alignment)

  • Follow Horizontal Path Axis : Sets the calculation method for the position in the horizontal direction when the library is assigned to the layout.

  • Follow Vertical Path Axis : Sets the calculation method for the position in the vertical direction when the library is assigned to the layout.

For the example where an object, at a offset distance from the layout
If the option is On, rotation is calculated based on the local axis of the assigned station as shown below.

If the option is Off, rotation is calculated based on the local axis of the layout start point as shown below.

  • [Considering Elevation by Skew]

    Vertical alignment is applied by recalculating the station of the rotated library.

Expand
titleDetailed Explanation (Considering Elevation by Skew)

  • [Preview Level]
    Sets the style of the Preview that shows when assigning.

Info

Reference - Preview Level

Info

It is recommended to assign the Point and Curve Library to the Assembly Unit first and then to Base mode along with other libraries than to assign them directly to Base mode.

  • [Structure Matching]
    Sets whether to match the Point Library Structure on the Assembly Unit Structure.

    • Off : Does not match the Library Structure data.

    • On : Matches the Library Structure data.

Expand
titleDetailed Explanation (Structure Matching)

  • Library Structure

    • The top-level entry of the Point Library Sturcture that matches with the Assembly Unit Structure is output.

  • Assembly Unit Structure Table

    • The table shows the Structure data defined by the Structure feature of the Assembly Unit.

    • Select the Structure data from the Table to match the Point Library Structure data.

  • [Quantity based on Library]
    Point Library 단위의 수량 산출 여부를 설정합니다.

    • Off : Library 단위로 수량을 산출하지 않습니다.

    • On : Library 단위로 수량을 산출합니다.

Expand
titleDetailed Explanation (Quantity based on Library)

  • [Material Type]
    공종 설정을 위한 재료 유형을 선택합니다. 재료 유형 선택 시 해당 재료에 등록된 Sub Material Type과 공종을 설정할 수 있습니다. Library 단위 수량 산출은 User Defined 형태로만 제공합니다.

    • None : 공종을 설정하지 않습니다.

    • User Defined : 사용자가 정의한 공종을 설정합니다.

  • [Sub Material Type]
    재료 유형에 따른 하위 그룹을 설정합니다. 선택 시, 해당 재료에 맞는 Field Table이 나타납니다.

  • [Field]
    객체의 공종을 설정합니다.

    • Name : 객체의 공종 기준(Field Type)을 설정합니다.

    • Item List : 객체의 공종 기준(Field Type)에 따른 하위 항목(Field Item)을 설정합니다.

Info

  • 라이브러리 단위 수량은 개수(EA)로만 산출할 수 있습니다.

  • 라이브러리 단위 수량 산출을 위한 Template 설정 조건

    • Template 기능 > Quantity Template Table > Material : Etc로 선택

    • Template 기능 > Quantity Template Table > Quantity : EA로 선택

  • [Structure Matching]
    Sets whether to match the Point Library Structure on the Assembly Unit Structure.

    • Off : Does not match the Library Structure data.

    • On : Matches the Library Structure data.

Expand
titleDetailed Explanation (Structure Matching)

  • Library Structure

    • The top-level entry of the Point Library Sturcture that matches with the Assembly Unit Structure is output.

  • Assembly Unit Structure Table

    • The table shows the Structure data defined by the Structure feature of the Assembly Unit.

    • Select the Structure data from the Table to match the Point Library Structure data.

  • [Quantity based on Library]
    Set whether to calculate quantity in Point Library units.

    • Off : Quantity is not calculated

    • On : Quantity is calculated in library units.

Expand
titleDetailed Explanation (Quantity based on Library)

  • [Material Type]
    Select the material type for construction settings. When selecting a material type, you can set the Sub Material Type and Field. Library unit quantity calculation is provided only in User Defined form.

    • None : Do not set the Material Type.

    • User Defined : Set the user-defined Material Type.

  • [Sub Material Type]
    Set the Sub Material Type under the Material Type.
    When you select a Sub Material Type, the registered Field table appears.

  • [Field]
    Set the Field item.

    • Name : Set the field name of the object.

    • Item List : Set items (Field Items) according to the object’s field type.
      Template setting conditions for calculating library unit quantity

Info

  • Library unit quantity can only be calculated by number (EA).

  • Template setting conditions for calculating library unit quantity

    • Template 기능 > Quantity Template Table > Material : select ETC

    • Template 기능 > Quantity Template Table > Quantity : select EQ

참고자료