Point Library Assign by Layout

Owned by 임익주(Lawrence)
Last updated: Dec 20, 2023
3 min read

개요

  • Assign the Point Library based on layout stations.

 

실행

  • [Base Mode]

    • Ribbon Menu > [Lab] Tab > Assign by Layout

 

설명

Point Library Assign (By Layout)

Assign the Point Library based on layout stations in Base mode

 

  • [Select Point Library]
    Select the Point Library to assign.

  • [By Layout]
    Select the Layout to assign.

  • [Initial Station]
    Enter the layout station where you want to assign the Point library.

  • [Rotation]
    Enter the rotation angle.

 

  • [Horizontal Offset], [Vertical offset]
    Enter the vertical and horizontal offset distance.

  • [Alignment]
    Sets the calculation method for the location to place the Point Library when the library is assigned to the layout.

  • Follow Horizontal Path Axis : Sets the calculation method for the position in the horizontal direction when the library is assigned to the layout.

  • Follow Vertical Path Axis : Sets the calculation method for the position in the vertical direction when the library is assigned to the layout.

For the example where an object, at a offset distance from the layout
If the option is On, rotation is calculated based on the local axis of the assigned station as shown below.

If the option is Off, rotation is calculated based on the local axis of the layout start point as shown below.

 

  • [Considering Elevation by Skew]

    Vertical alignment is applied by recalculating the station of the rotated library.

  • [Preview Level]
    Sets the style of the Preview that shows when assigning.

Reference -

It is recommended to assign the Point and Curve Library to the Assembly Unit first and then to Base mode along with other libraries than to assign them directly to Base mode.

 

  • [Structure Matching]
    Sets whether to match the Point Library Structure on the Assembly Unit Structure.

    • Off : Does not match the Library Structure data.

    • On : Matches the Library Structure data.

  • Library Structure

    • The top-level entry of the Point Library Sturcture that matches with the Assembly Unit Structure is output.

  • Assembly Unit Structure Table

    • The table shows the Structure data defined by the Structure feature of the Assembly Unit.

    • Select the Structure data from the Table to match the Point Library Structure data.

  • [Quantity based on Library]
    Set whether to calculate quantity in Point Library units.

    • Off : Quantity is not calculated

    • On : Quantity is calculated in library units.

  • [Material Type]
    Select the material type for construction settings. When selecting a material type, you can set the Sub Material Type and Field. Library unit quantity calculation is provided only in User Defined form.

    • None : Do not set the Material Type.

    • User Defined : Set the user-defined Material Type.

  • [Sub Material Type]
    Set the Sub Material Type under the Material Type.
    When you select a Sub Material Type, the registered Field table appears.

  • [Field]
    Set the Field item.

    • Name : Set the field name of the object.

    • Item List : Set items (Field Items) according to the object’s field type.
      Template setting conditions for calculating library unit quantity

  • Library unit quantity can only be calculated by number (EA).

  • Template setting conditions for calculating library unit quantity

    • Template 기능 > Quantity Template Table > Material : select ETC

    • Template 기능 > Quantity Template Table > Quantity : select EQ

 

참고자료