Summary | Example of use of case for the Export (Analysis case) functionfeature | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Related Function | Base Mode > Application > Analysis > Analysis Case(Define) / Analysis Case(Export) | ||||||||||||||||||
Type |
|
Q. I
...
would like to extract the analysis model as an mct file.
A.
...
In the Analysis Mode, the object can be created as an Analysis case
...
and then exported through Analysis > midas Civil
...
under the Application tab.
This is a function to select a case extracted as an analysis model among a number of The feature selects a case, among the many analysis cases defined in the Analysis Mode and extract , that is used in the analysis model and exports it as an external file (*.mct) file.
Let's take a Let’s look at the example below.
| Info |
|---|
1) Select Define under Analysis Case > Define. In the Define tab, select the2) Select the member to export in the Define tab. => You can select1D / 2D Member & Link elements can be selected. ► When exporting to an analysis file, 1D Member is members are linked with to 1D Frame element frame elements and 2D Member is members are linked with to 2D Plate elementplate elements. 3) Defines the element division when analyzing 1D/2D memberMembers. => Provides the (Division / Length) option. 4) Select Civil under Application > Analysis > Civil. 5) Select the desiredan Analysis Case from the Analysis Case List. => An Analysis Case is defined as a case where Case when all or part of some modeling is selected and analyzed (Case). 6) A *.mct file is created for interworking withmidas Civil is createdintegration. |
Example of exporting a 1D Member Export Example
...
Figure. 1 Base > Application > Analysis Case > Define
...
Figure. 3 MCT → midas Civil (1D element)
| Info |
|---|
| When setting the plate line, it is possible to set the thickness according to the section change The thickness can be set according to the changes in the section when setting the Plate Line. |
Example of exporting a 2D Element Export element using the Plate Line of a 1D Member - Tapered Thickness Check On
...