| Table of Contents |
|---|
Feature Summary
| Info |
|---|
[Shortcut Command : CV] Add to Create an additional section in Drafter on the section created from CIM Drafter creates an additional section. |
Feature Explanation
Generate Drawing > View > Cutting View
It The feature can be executed through by using the Shortcut Command CUTTINGVIEW (CV) command or through by selecting the Cutting View of feature in the View in tab of the Generate Drawing menu.
Execute Executing the Cutting View command → Set the title of the Section Name header setting → Set the numbering order of Section name numbering rule setting → Set the Section name setting Name → Draw with 2 points to be cutthe Cutting locations by using 2 Points.
Prefix Text <Section> : The value in <> shows the currently set Prefix value . It takes Set the set Prefix as the header and adds a number after it title and set the numbering order according to the settingsettings. (ex. Section1., Section2, Section3….)
Number[Alphabet(A)/Number(N)/Manual(M)]: Displays prefix prefixes followed by number or alphabet according to numbers or alphabets, depending on the setting value of this option. The value after the last number or alphabet used is automatically appended. If Manual is selected, the user enters it directly.
Section Name <Section 1-1> : The value in <> indicates the name Section Name to be cut. This step allows the user to decide which name will eventually be applied.
| Note |
|---|
Drafter's cutting section Cutting Section is created with the width of the section only as much as the size of the front and rear visible range set when cutting the view in CIM. Taking the above picture as an example, if the user combines the front and rear visible ranges in the Cutting Box to create a view with a size of 10m, and cut the section in the Drafter, a 10m long section is created. |