Summary
Edit the Slope Profile.
How to Run
[Model Mode]
Ribbon Menu > [Model] Tab > [Terrain] Group > Surface > Slope Profile
Explanation
Slope Profile Surface
Select the slope profile to edit.
[Select Slope Profile]
Select the profile to edit.
When Cut Profile is Selected
Edit the cut profile.
[Edit Slope Profile]
Edit the profile of the cut slope.[Profile]
The limit height and slopes of the generated profiles can be editted.
Info |
---|
When creating a slope, if you the user selected a stratum to create it, you the user can modify it in the Additional Slope Tab. |
You The user can change the slope value when creating the slope. Slope value corresponding to the strata.
When selecting Fill Profile
Edit Fill Profile.
[Edit Slope Profile]
Edit the profile of the Fill Slope.[Profile]
The limit height and slopes of the generated profiles can be editted.
Info |
---|
In the Fill Slope option, there is no option to modify the strata. This is because the Fill Slope is created above the surface. Changes to the Subsoil/Subgrade are done in the Subgrade Tab. |
The slope can be modified if the subsoil/subgrade depth