Feature Summary

Feature Explanation

Generate Drawing > Style > Rebar Style

General

Tab

• Show Point Type Rebar in Visible Range : If the cut section and the rebar are not positioned vertically as shown in the figure below, the section cut by the visible range is expressed as a point, and the rebar included in the visible range is expressed as a line. If this option is turned off, only points are displayed in the visible range of the relevant rebar without expressing the linelines.

• Show Line Type Rebar in Visible Range: Among the rebars that do not intersect the cutting surface of the Cutting Box, the rebars in the Cutting Box are expressed in the form of a line. If this option is turned off, the line reinforcing bars type rebars expressed within the visible range are not displayed. In this case, only rebars that are on the same plane as the cutting plane of the Cutting Box are displayed.

• Group Rebar Type: Set the expression method of rebars arranged in groups. If All is setselected, all group reinforcing bars rebars are displayed. If you select the user selects First, only the first reinforcing bar rebars in the group is are displayed. If you select the user selects Last, only the last reinforcing bar rebars in the group is are displayed. If you select the user selects First and Last, only the two bars rebars at the beginning and end of the group are displayed. If you select the user selects Center, only the reinforcing bars rebars in the center of the group are displayed. If you want the user wants to display only the selected rebar in the group, you the user can display only the selected rebar through the Generate Drawing > Style > Rebar Group Setting functionfeature.

• Point Type Rebar: Set the expression method of the Point Type rebar. Select Outline to display it in the form of a hollow circle. If you select Select Filled Circle , it is expressed to express the point rebar as a circle filled with the color according to the setting of the Pattern Tap. If you select Select Circle by 3 Layers , to express it is expressed as three circles that gradually become smaller.

• Line Type Rebar: Set the expression method of the Line Type rebar. If you select Select Single Line, reinforcing bars are displayed with one to display rebars as a single line. If you select Select Double Line , the reinforcing bar is displayed as a double line to display rebars as double lines reflecting the actual thickness of the reinforcing bar rebars that is are not filled with a pattern. If Filled Double Line is selected, the actual thickness of the rebar is reflected and the rebar filled with the color according to the setting in the Pattern Tap is displayed. If you select . Select Double Line with Center Line , the bars are displayed to display rebars as double lines along with the center line of the barsrebars. Select Filled Double Line with Center Line to display the reinforcing bars rebars of the filled double line with the center line.

• Splice Symbol : Sets the method of displaying splices when there are splices in Line Type reinforcing barsrebars.

• Use Rebar Color and Layer by Diameter: This is used Used to specify the color of the rebar for each rebar diameter. You The user can use custom color colors or random colorcolors.

Line Style

Tab

• Line Type Rebar : Defines the line color, line style, and layer of the Line Type rebar.

• Point Type Rebar: Defines the line color, line style, and layer of the Point Type rebar.

• Visible Range Line Type Rebar : Defines the line color, line style, and layer of the Line Type rebar included in the visible range.

• Visible Range Point Type Rebar : Defines the line color, line style, and layer of the Point Type rebar included in the visible range.

• Rebar Center: Set the color of the center line of the rebar.

Pattern

Tab

• Line Type Rebar: Set the fill color and layer of the line type rebar.

• Point Type Rebar : Set the fill color and layer of the point type rebar with the Point Type.