Page Comparison

Figure. 7

▶ For the dimension line, select CIM Drawing (Drawing) > 2.5D Dimension (2.5D dimension) > 2.5D Linear Alignment or 2.5D Aligne (2.5D dimension).

　Select or enter a command. (LINEAR2ALIGNMENT2.5DDIMENSION / ALIGNED2.5DDIMENSION)

1.LINEAR2 ALIGNMENT2.5DDIMENSION (linear alignment 2.5D dimension)

　The generated base of the dimension line is used as the dimension line with linearityalignment,

　As an option, it is selected and applied according to the distance and the increment distance of X, Y, Z.

2. ALIGNED2.5DDIMENSION (aligned 2.5D dimension)

　It is used as a dimension line aligned to any edge and marked.

　As an option, it is selected and applied according to the distance and the increment distance of X, Y, Z.

Figure. 8

▶ In the example of explanation), input LINEAR2ALIGNMENT2.5DDIMENSION to display the height of the coping, column, and foundation of the pier.

　Enter an option for the incremental distance to be created in the Z direction. ( z )

▶ Click the first dimension line creation point. (①, ②)

▶ Enter the separation distance in the dimension line creation direction or select a creation point with the mouse. (③)

　In the example of explanation), the distance at which the dimension line will be created to the outer edge of the structure is entered. (1000)

Figure. 10

▶ This is the section where the dimension line is entered.

▶ Picture. The 2.5D dimension lines of 8 were created using the ( LINEAR2ALIGNMENT2.5DDIMENSION / ALIGNED2.5DDIMENSION ) function.

▶ In the example of the description), the height dimension line of the pier is input with the 2.5D LINEAR ALIGNMENT dimension function,

　Other dimension lines were entered with the 2.5D Aligned dimension function.