Summary | I want to make a 3D section for general view using ISO View. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Related Function | [Drafter] CAD View | ||||||||||||
Type |
|
...
| Info |
|---|
Figure. 7 ▶ For the dimension line, select CIM Drawing (Drawing) > 2.5D Dimension (2.5D dimension) > 2.5D Alignment or 2.5D Aligne (2.5D dimension). Select or enter a command. (ALIGNMENT2.5DDIMENSION / ALIGNED2.5DDIMENSION) 1. ALIGNMENT2.5DDIMENSION (alignment 2.5D dimension) The generated base of the dimension line is used as the dimension line with alignment, As an option, it is selected and applied according to the distance and the increment distance of X, Y, Z. 2. ALIGNED2.5DDIMENSION (aligned 2.5D dimension) It is used as a dimension line aligned to any edge and marked. As an option, it is selected and applied according to the distance and the increment distance of X, Y, Z. |
...
| Info |
|---|
Figure. 8 ▶ In the example of explanation), input ALIGNMENT2.5DDIMENSION to display the height of the coping, column, and foundation of the pier. Enter an option for the incremental distance to be created in the Z direction. ( z ) ▶ Click the first dimension line creation point. (①, ②) ▶ Enter the separation distance in the dimension line creation direction or select a creation point with the mouse. (③) In the example of explanation), the distance at which the dimension line will be created to the outer edge of the structure is entered. (1000) |
...