개요
해석 모델(Analysis Case)을 정의합니다.
Summary
Defines the Analysis case.
How to Run
[Analysis Mode]
Ribbon Menu > [Analysis] Tab > [Analysis Case] Group > Define
설명
일반 해석 모델 생성
midas Civil과 연동하여 해석을 수행할 해석 모델을 정의합니다Explanation
Create General Analysis Model
Defines the analysis model to perform analyses in conjunction with midas Civil.
Define Tab
Select General Analysis를 선택합니다Analysis.
[Classification]
Name : 해석 모델의 이름을 설정합니다Set the name of the analysis.
[Select Target]
1D Element : 해석 모델에 포함시킬 1D Member 객체를 선택합니다Select the 1D member objects to include in the analysis model.
2D Element : 해석 모델에 포함시킬 2D Member 객체를 선택합니다Select the 2D member objects to include in the analysis model.
Link : 해석 모델에 포함시킬 Link 요소를 선택합니다Select the link elements to include in the analysis model.
[1D Element Setting]
Mesh Size : 1D 요소의 길이 혹은 분할 개수를 입력하여 하나의 부재를 여러 개의 요소로 분할하여 해석을 수행합니다Enter the size of 1D elements or the number of elements to divide a member into several elements for analysis.
Section
Center Location : 단면의 중심 위치 찾는 방법을 설정합니다Sets the method of searching the center of section.
Bounding Box Center : 단면의 최외곽을 지나는 사각형의 중심을 Center로 사용합니다Uses the center of the bounding box that passes through the outermost side of the section.
Centroid : 단면의 도심을 Center로 사용합니다Uses the centroid of the section.
[2D Element Setting]
Mesh Size : 2D 요소의 길이 혹은 분할 개수를 입력하여 하나의 부재를 여러 개의 요소로 분할하여 해석을 수행합니다Enter the size of 2D elements or the number of elements to divide a member into several elements for analysis.
Thickness : 2D Mesh의 두께 적용 방법을 설정합니다Sets the thickness of the 2D Mesh.
Maximum : 가장 큰 값을 두께로 적용합니다Applies the largest thickness value.
Minimum : 가장 작은 값을 두께로 적용합니다Applies the smallest thickness value.
Average : 두께의 평균값을 적용합니다Applies the average thickness value.
[Load]
Export Self Weight : 자중에 대한 Uses the anlaysis information from midas Civil 해석 연동 정보를 설정합니다.
If turned On 할 경우, Vector 입력창이 나타납니다, a vector input box appears. (Global X, Y, Z)
Expand | ||
---|---|---|
| ||
midas CIM 모델링 과정에서 생성한 객체들 중 해석 시 구조체로 해석할 객체와 하중으로만 고려할 객체로 분리할 필요가 있습니다. 이를 분리하는 옵션으로서 In the midas CIM modeling process, it is necessary to separate the created objects as structural members and as nonstructural members. For this, the Structural Member / Nonstructural Member 옵션을 사용할 수 있습니다option can be used.
|
Property Tab
Info |
---|
참고 Reference - Analysis Case(Property) |
단위 길이 해석 모델 생성
midas Civil과 연동하여 단위 길이 해석을 수행할 해석 모델을 정의합니다Create Unit Length Analysis Model
Defines the analysis model to perform unit length analysis in conjunction with midas Civil.
Define Tab
Select 2D Analysis를 선택합니다Analysis.
[Classification]
Name : 해석 모델의 이름을 설정합니다Set the name of the analysis.
[Select Target]
1D Element : Profile을 갖는 1D Member 객체를 선택합니다Select the 1D member with the profile.
Profile : 1D Member가 갖는 Profile 중 단위 길이 해석 케이스를 정의할 Profile을 선택합니다Select the profile that is applied to the 1D member to define the unit length anlaysis case.
[1D Element Setting]
Mesh Size : 1D 요소의 길이 혹은 분할 개수를 입력하여 하나의 부재를 여러 개의 요소로 분할하여 해석을 수행합니다Enter the size of 1D elements or the number of elements to divide a member into several elements for analysis.
Section
Center Location : 단면의 중심 위치 찾는 방법을 설정합니다Sets the method of searching the center of section.
Bounding Box Center : 단면의 최외곽을 지나는 사각형의 중심을 Center로 사용합니다Uses the center of the bounding box that passes through the outermost side of the section.
Centroid : 단면의 도심을 Center로 사용합니다Uses the centroid of the section.
Section Offset from Left-Bottom : 부재의 Cardinal Point 속성을 Left-Bottom으로 변경합니다. 단면과 부재 기하선의 상대적인 위치가 유지되도록 자동으로 Offset 값이 입력되어서 해석 모델이 생성됩니다Changes the object’s cardinal point properties to LeftBottom. The analysis model is created by automatically entering the offset value to maintain the relative position of the section and the member geometry.
[Load]
Export Self Weight : 자중에 대한 Uses the anlaysis information from midas Civil 해석 연동 정보를 설정합니다.
If turned On 할 경우, Vector 입력창이 나타납니다, a vector input box appears. (Global X, Y, Z)
Property Tab
Info |
---|
참고 Reference - Analysis Case(Property) |
시공단계 해석 모델 생성
midas Civil과 연동하여 시공단계 해석을 수행할 시공단계 해석 모델을 정의합니다Create of Construction Stage Analysis Model
Defines the analysis model to perform Construction Stage Analysis in conjunction with midas Civil.
Define Tab
Select Construction Stage Analysis를 선택합니다Analysis.
[Classification]
Name : 해석 모델의 이름을 설정합니다Set the name of the analysis.
[Construction Stage Set]
시공단계 정의 기능에서 생성한 시공단계 세트를 선택합니다Select the Construction Stage set created using the construction stage define feature.[1D Element Setting]
Mesh Size : 1D 요소의 길이 혹은 분할 개수를 입력하여 하나의 부재를 여러 개의 요소로 분할하여 해석을 수행합니다.Section : 단면의 중심 위치 찾는 방법을 설정합니다Enter the size of 1D elements or the number of elements to divide a member into several elements for analysis
Section : Sets the method of searching the center of section.
Bounding Box Center : 단면의 최외곽을 지나는 사각형의 중심 The center of the bounding box that passes through the outermost side of the section.
Centroid : 단면의 도심Centroid of the section.
[Load]
Export Self Weight : 자중에 대한 Uses the anlaysis information from midas Civil 해석 연동 정보를 설정합니다.
If turned On 할 경우, Vector 입력창이 나타납니다, a vector input box appears. (Global X, Y, Z)
Property Tab
Info |
---|
참고 Reference - Analysis Case(Property) |