Versions Compared

Old Version 1

changes.mady.by.user 이혜연 (Unlicensed)

Saved on

compared with

New Version 2

changes.mady.by.user 이혜연 (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Summary

Example of use of Export (Analysis case) 기능의 사용 예function

Related Function

Base Mode > Application > Analysis > Analysis Case(Define) / Analysis Case(Export)
User Section Mode > User Section > Shape > Plate Line

Type

Status
colourBlue
titleFAQ
,
Status
colourYellow
titleTip
,
Status
colourGreen
titleExample

Q.

...

I want to extract the analysis model as an mct file.

 

A.

...

After creating an object as an Analysis case in Analysis Mode, it can be extracted through Analysis > midas Civil in the Application tab.

 

This is a function to select a case extracted as an analysis model among a number of analysis cases defined in Analysis Mode and extract it as an external file (*.mct)로 추출하는 기능입니다.아래의 예시를 통해 알아보겠습니다.

Let's take a look at the example below.

Info

1) Select Analysis Case > Define을 선택합니다Define.2) Define tab에서 Export할 Member를 선택합니다

  1. In the Define tab, select the member to export. => You can select 1D / 2D Member &

Link요소를 선택할 수 있습니다

  1. Link elements.

► 해석 파일로 Export시 1D Member는 1D Frame요소로, 2D Member는 2D Plate요소로 연동됩니다.
► 1D Member의 User Section에서 Plate Line 정의 시 2D Plate 요소로 연동 가능합니다.3) 1D / 2D Member의 해석 시 요소분할을 정의합니다When exporting to an analysis file, 1D Member is linked with 1D Frame element and 2D Member is linked with 2D Plate element.
► When defining Plate Line in User Section of 1D Member, it can be linked with 2D Plate element.

  1. Define element division when analyzing 1D / 2D member. => (Division / Length)

옵션을 제공합니다

  1. option.

4)

  1. Select Application > Analysis >

Civil을 선택합니다

  1. Civil.

5)

  1. Select the desired Analysis Case

List에서 원하는 Analysis Case를 선택합니다

  1. from the Analysis Case List.

=> Analysis Case라 함은 전체 또는 일부 모델링을 선택하여 해석할 경우Case is defined as a case where all or part of modeling is selected and analyzed (Case)로 정의합니다.6) midas Civil 연동을 위한

  1. A *.mct

파일이 생성됩니다

  1. file for interworking with midas Civil is created.


1D Member의 Member Export 예시Example

...

　

그림Figure. 1 Base > Application > Analysis Case > Define

...

그림Figure. 2 Base > Application > Civil

　

...

　

그림Figure. 3 MCT → midas Civil (1D요소1D element)

Info

  1. Plate Line 설정시 단면변화에 따른 Thickness 설정이 가능합니다.

...

  1. When setting the plate line, it is possible to set the thickness according to the section change.


Example of 2D Element Export using Plate Line of 1D Member - Tapered Thickness Check On

...

그림Figure. 4 User Section > Plate line설정 line setting (Tapered Thickness Check On)

　

...

그림Figure. 5 Base > Application > Analysis Case > Define

...

　

그림Figure. 6 MCT → midas Civil (2D요소2D elements)