Summary
Export CIM object as a IFC (*.ifc).
How to Run
File Menu > Export > IFC
Explanation
Export IFC Files
Export a *.ifc file which is a neutral 3D Modeling file format.
Export as an IFC 4.0 version file.
[Select Target]
Select the range of the object to be exported.All in Current Mode: Export all objects in the current Mode.
Selected Objects Only: Export selected objects only.
[Categorize Target]
None: Form an IFC file classification system based on CIM object type.
Structure: Form an IFC file classification system based on structure information.
[Geometric Representation]
Select the Geometry Type for representation when converting a CIM 3D object to an IFC object.Curved Member: Sets the Geometry Type for a Curved Member.
Swept Area Solid(Recommended): Sweeps a surface profile along a line curve to form a solid.
Faceted Solid: Converts a curved surface to a triangular tessellation format.
(Used to interchange with software that does not support Swept Area Solid.)
Curved Face: Sets the Geometry Type for a Curved Face.
Curved Surface: Converts to a Curved Surface Type that IFC supports.
Faceted Face: Converts a curved surface to a triangular tessellation format.
B-Spline Path: Sets the Geometry Type for a member with a B-spline path.
B-Spline: Converts to a B-Spline geometry type.
B-Spline with knot: Converts to a B-Spline with knot geometry type.
Poly line : Converts to a poly line geometry type.
Primitive Solid : Set the Geometry Type for a primitive solid.
CSG 3D : Converts to a three-dimensional figure that can be represented by a few dimensions. Cylinder / Pipe / Sphere / Cone / Block are supported.
Extruded Solid(Recommended): Converts a surface profile into an extrusion at a specified direction. This is suitable for straight line members.
Faceted Solid: Converts a curved surface to a triangular tessellation format.
(Used to interchange with software that does not support CSG 3D / Extruded Solid)
Rebar: Set the Geometry Type to be converted for the Rebar object.
Wire Body: Exports the Rebar object as a curve. Polyline, Circle, Arc, Ellipse, Elliptic arc, and Bspline are supported.
Swept Disk Solid(Recommended): Converts the Circle/Pipe Profile to a Sweep shape along a curved alignment. 3-Dimensional Path is supported.
Swept Area Solid: Converts the Plane Profile to a Swept shape along a curved alignment. Only 2-Dimensional Path is supported.
Faceted Solid: Converts curves into triangular Tessellation.
(Used to interchange with software that does not support Wire Body / Swept Disk Solid / Swept Area Solid.)
Tendon: Set the Geometry Type to be converted for the Tendon object.
Wire Body: Exports the Tendon object as a curve. Polyline, Circle, Arc, Ellipse, Elliptic arc, Bspline are supported.
Swept Disk Solid(Recommended): Converts the Circle/Pipe Profile to a Sweep shape along a curved alignment. 3-Dimensional Path is supported.
Swept Area Solid: Converts the Plane Profile to a Swept shape along a curved alignment. Only 2-Dimensional Path is supported.
Faceted Solid: Converts curves into triangular Tessellation.
(Used to interchange with software that does not support Wire Body / Swept Disk Solid / Swept Area Solid.)
Template Section: Sets the Geometry Type of an object that uses a template section.
Parameterized Profile(Recommended): Creates an object using the IFC template profile.
Arbitrary Closed Profile: Create objects using closed Profile different types of curves (Polyline / Circle / Arc etc.)
[Tessellation]
Sets the angle of a triangle in a Tessellation on objects created through the Faceted method.[Option]
Export Tendon: Exports the Tendon object.
Export Stiffener: Exports the Stiffener object.
Export Wire Body: Exports Wire Body.
Export Property: Exports property information of the object.
Export Material: Exports material information of the object.
Export Color: Exports the color information of the object.
Reference Materials
Link to Reference Materials