Feature Summary
[Shortcut Command : RST]
This is the function to set the expression style of the rebar. Through this setting, you can turn on/off the expression in the visible range of line or point type reinforcing bars, and you can set various expression methods such as double line, single line, fill, and layer.
Function Explanation
Generate Drawing > Style > Rebar Style
General Tap
Show Point Type Rebar in Visible Range : If the cut section and the rebar are not positioned vertically as shown in the figure below, the section cut by the visible range is expressed as a point, and the rebar included in the visible range is expressed as a line. If this option is turned off, only points are displayed in the visible range of the relevant rebar without expressing the line.
Show Line Type Rebar in Visible Range : Among the rebars that do not intersect the cutting surface of the Cutting Box, the rebars in the Cutting Box are expressed in the form of a line. If this option is turned off, the line reinforcing bars expressed within the visible range are not displayed. In this case, only rebars that are on the same plane as the cutting plane of the Cutting Box are displayed.
Group Rebar Type : Set the expression method of rebars arranged in groups. If All is set, all group reinforcing bars are displayed. If you select First, only the first reinforcing bar in the group is displayed. If you select Last, only the last reinforcing bar in the group is displayed. If you select First and Last, only the two bars at the beginning and end of the group are displayed. If you select Center, only the reinforcing bars in the center of the group are displayed. If you want to display only the selected rebar in the group, you can display only the selected rebar through the Generate Drawing > Style > Rebar Group Setting function.
Point Type Rebar : Set the expression method of the Point Type rebar. Select Outline to display it in the form of a hollow circle. If you select Filled Circle, it is expressed as a circle filled with the color according to the setting of the Pattern Tap. If you select Circle by 3 Layers, it is expressed as three circles that gradually become smaller.
Line Type Rebar : Set the expression method of Line Type rebar. If you select Single Line, reinforcing bars are displayed with one single line. If you select Double Line, the reinforcing bar is displayed as a double line reflecting the actual thickness of the reinforcing bar that is not filled with a pattern. If Filled Double Line is selected, the actual thickness of the rebar is reflected and the rebar filled with the color according to the setting in the Pattern Tap is displayed. If you select Double Line with Center Line, the bars are displayed as double lines along with the center line of the bars. Select Filled Double Line with Center Line to display the reinforcing bars of the filled double line with the center line.
Splice Symbol : Sets the method of displaying splices when there are splices in Line Type reinforcing bars.
Use Rebar Color and Layer by Diameter : This is used to specify the color of the rebar for each rebar diameter. You can use custom color or random color.
Line Style Tap
Line Type Rebar : Defines the line color, line style, and layer of the Line Type rebar.
Point Type Rebar : Defines the line color, line style, and layer of the Point Type rebar.
Visible Range Line Type Rebar : Defines the line color, line style, and layer of the Line Type rebar included in the visible range.
Visible Range Point Type Rebar : Defines the line color, line style, and layer of the Point Type rebar included in the visible range.
Rebar Center : Set the color of the center line of the rebar.
Pattern Tap
Line Type Rebar : Set the fill color and layer of the line type rebar.
Point Type Rebar : Set the fill color and layer of the rebar with the Point Type.