Summary

This is an annotation creation function available only in CIM View Mode.
It manually annotates reinforcing bars arranged in groups in the form of line bars in sections, based on reinforcing bar model information defined in CIM.

How to Run

[CIM View Mode]

Ribbon Menu > [INFRA-DESIGN] Tab> Annotation> Multi Rebar Annotation [MUA]

Explanation

How to use Single Annotation.

Run the Multi Rebar Annotation [MUA] command or execute the Multi rebar annotation function in the annotation section of the INFRA-DESIGN menu tab.

Multi Rebar Annotation, Shortcut key : MUA

Commentary contents

[Command]
Execute Multi Rebar Annotation from the tree menu or enter the shortcut key MUA in the command window.

CAD ID Maunal_그룹 철근 주석(EN).mp4

[Command]

Object select :
Select the grouped line type rebars for which you want to create a group rebar annotation.
Select type of multi0annotation. [Line(L)/Polyline(P)] <L> : Enter
Select Line and Polyline Type. In typical cases, Line Type is applied.
Specify insert point :
Specify where the leader line will be created for the grouped rebar.
(When drawing the baseline, specify that all rebars are included.)
Select BASE Point :
If you specify the location where the rebar annotation will be created, the annotation will be generated.

[Use of the Object Tree When Not Using the Multi Rebar Annotation Function]
Selecting a Rebar : When you select a rebar for which you want to create an annotation, the name of the object is tracked in the Object tree list at the bottom left.
Expanding the Object Name Subtree : When you expand the object name subtree, the Annotation item appears. You can turn this checkbox on/off to automatically display the annotation.
Group Rebar Annotations : Annotations expressed as group rebar annotations are manually indicated annotations and are not controlled in the Object tree list.