Property(Shape) Checking and Modifying Section Properties

Figure above. 1 and Figure. In the pier structure of 2, check the section Property(Shape) contents using the side section coping part as an example.

Tapered member & Section

Select the cross section member creation check box and the shape of the section.

In case of a side section member, enter the section information to create a side section in Start Point and End Point Tap.

painting. 1 is the cross section start point section information and figure. 2, the end point section information of the side section is input.

You can change section information in the user environment.

Local axis

Sets the placement location and orientation of the section relative to the part centerline. Depending on the setting position of the Cardinal Point, it is also reflected in the analysis linkage model in this way.

Additional offset

Local y, z additional separation distance can be added from the Cardinal Point position of the local axis.

Shape variation

This option appears when setting the Tapered member Check Box On, and defines the connection shape for the starting and ending point connections.