Summary

Define cut and fill slopes that are pre-defined based on slope, bench, and maximum height.

How to Run

[Base Mode]

Ribbon Menu > [Model] Tab > [Terrain] Group > [Slope] Group > Preset

Explanation

[Select Slope Type]
Selecting the Type of the Slope Preset.
- Fill : Fill slope
- Cut : Cut slope
[Slope Preset]
Selecting the list of Slope Presets.
[Name]
Entering the name of the Slope Preset.
[Slope Profile]
Entering information for the Slope Profile.
- Slope Start from Fist Row : Selecting whether to create a starting profile for the slope.

Fill

Height(m)	Slope	Bench width(m)	Bench Slope(%)

Height(m)	Slope	Bench width(m)	Bench Slope(%)
Height of the fill slope	Slope of the fill slope	Bench width of the fill slope	Bench slope of the fill slope

Cut

Soil Layer Slope

Layer	Start Slope	Maintain Slope

Layer	Start Slope	Maintain Slope
Soil layer	Slope that begins when encountering a layer	Slope that is maintained after the bench height of the Start Slope

The Layer applies Preset in the order of [Ground → Soil 1 → Soil 2]. For example, in the case of three layers, the slopes of Soil 3, Soil 4, and Soil 5 are all set to the same value. It supports setting individual layer slopes differently for up to five layers.

Apply Slope by Higher Side : An option to choose the slope of the layer with more occurrences among the slopes between layers.

→ Checking the box on the right will compare the layer of the current row and the layer of the row above.

Bench Profile

Height(m)	Bench width(m)	Bench Slope(%)	Drain Width(m)	Drain Slope(%)

Height(m)	Bench width(m)	Bench Slope(%)	Drain Width(m)	Drain Slope(%)
Height of the cut slope	Bench width of the cut slope	Bench slope of the cut slope	Drain width of the cut slope	Drain slope of the cut slope

Manual (MIDAS CIM)

Slope Preset

Summary

How to Run

Explanation

Reference Materials

Related content