Summary

How to Run

[Base Mode]

Path is selected as a feature, and discontinuous/closed features can also be selected.

[Select Road Surface]
Select the road surface to create the slope solid.
[Slope Direction]
Sets the direction to create the slope.
[Slope Preset]
Selecte the pre-defined slope preset.
[Profile Spacing]
Sets the spacing of the profile.
[Select Terrain Surface]
- Ground Surface : Select the ground surface.
- Boring Surface : Select the boring surface.
[Select Retaining Wall Line]
Select the feature to create the retaining wall.

No slope is created from the selected line to the Ground Surface.

[Surface Option]
- Bench Clearance : Creating the slope in a tidy form at the end of the berm.
- Round Discontinuous : Creating the slope of a discontinuous area in a round shape.
- Create Solid : Creating the slope solid.
[Surface Option]
- Rounding : Rounding the end of the cut slope.
- Last Bench Height : Entering the height of the last bench.
  - If the height of the last bench is less than the input value, the bench will not be created.
- Offet Line : Offsetting the planned line of the slope by the entered value to create a reference line.
[Preview]
- Preview the slope to be created.

This is only applicable when creating a Slope Solid.

Depth : Setting the depth of the subgrade layer

Slope : Setting the slope of the subgrade shoulder near the edge of the road.