Sweep
- 이두영
- Daniel Lee (Unlicensed)
- Anonymous
- 1 Overview of Functions
- 2 Details of Functions
- 2.1 Generate Tab
- 2.1.1 Copy Option
- 2.1.2 Type
- 2.1.3 Select target
- 2.1.4 Select Path
- 2.1.5 Edit path
- 2.1.6 Generate
- 2.1.7 Option
- 2.1.8 Preview level
- 2.1 Generate Tab
Overview of Functions
Use sweep to Move or copy the targeted object.
Details of Functions
Generate Tab
Copy Option
When checked On, the sweep object will be rotated and copied.
Type
Choose how you sweep the object.
By Distance : Sweep the input distance from a specific location on the route.
By 2 Points : Sweep the distance by selecting two points on the path.
Select target
Select Path
Edit path
Generate
Option
Follow horizontal angle : When checked On, the horizontal direction of the object is defined as the local coordinate system of the path (as a ‘global coordinate system’ when the check is off).
Follow vertical angle : When checked, the object's vertical direction is defined as the local coordinate system of the path (as a ‘global coordinate system’ when the check is off).
Preview level
Bounding Box-All : The box that surrounds the entire target object is shown as Preview.
Bounding Box-Each : Each box that wraps the target object appears in Preview.
Original Model : The preview is the same as that of the original object.