Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Step

Status

비고

Step1. PSC Box CLB 생성의 이해

-

Step2. New File & Curve & Point Library Import

Step3. FSM Assembly Unit 생성

Step4. Base > Layout > 선형정보 입력 및 생성 (Alignment, Profile, Cross Section)

Step5. Base > Assembly Assign > 선형에 FSM Assembly Unit 할당

Step6. Base > Analysis > Midas Civil 해석 모델 생성

완료

-

완료​

완료​

완료​

완료​

완료​

-http://wiki.midascim.com.s3-website-us-east-1.amazonaws.com/tutorial/psc-box/psc-box-clb-modeling/

-http://wiki.midascim.com.s3-website-us-east-1.amazonaws.com/tutorial/psc-box/psc-box-tendon-modeling/

-

-

-

CIM-3925: Assembly Unit에 Curve Library 할당시 오류

CIM-3589 : MCT File 생성시 Tendon 누락

Step1. PSC Box CLB 생성의 이해

  • PSC Box Tutorial

Step2. New File & Curve & Point Library Import

  • Base > Curve > Import

 Curve Library

  • PSC Box

  • DEF_L_BARRIER

  • DEF_R_BARRIER

  • DEF_M_BARRIER

  • DEF_PAVE

  • Base > Point > Import

 Point Library

  • DEF_A1

  • DEF_A2

  • DEF_PIER

Step3. FSM Assembly Unit 생성

  • BASE > Assembly > Create

 Setting

  • Name : FSM

  • Unit Length : 180.m (교량 시종점부 : Expansion Joint 0.5m)

 Plane

  1. Function Tab

  • Method : By Point

  • Location : 0.5, 179.5

  1. Property Tab

  • Alignment : By Distance

  • Origin : Ref. Line start (0.5m)

  • Origin : Ref. Line End (179.5m)

 Path

  1. Main Constraint Path

  • Select Constraint Plane : ALL Select

  • Alignment : Current

  • offset-y : 0.0m

  • offset-z : 0.0m

  1. Main Constraint Path

  • Paving ; Alignment : Current, offset-y : ±3.9725m, offset-z : 0.0m

  • L&R Barrier ; Alignment : Current, offset-y : ±7.55m, offset-z : -0.08m

  • PSC Box & Median Barrier : Alignment : Current, offset-y : 0.0m, offset-z : -0.08m

 Assign Library (Curve)

  • Path에서 정의한 Main Constraint Path에 각각의 Curve Library 할당

 Constraint Point

  1. Function Tab

  • Method : Point

  • Select Constraint Path : Default Constraint Path

  • Define Location : 0.0m, 60.0m, 120.0m, 180.0m

  1. Property Tab

  • Alignment : By Ratio

 Assign Library (Point)

  • DEF_A1 ; Select Point : 0.0m

  • DEF_A2 ; Select Point : 180.0m

  • DEF_PIER ; Select Point : 60.0m, 120.0m

Step4. Base > Layout > 선형정보 입력 및 생성 (Alignment, Profile, Cross Section)

  • Base > Layout

 Create & Edit

  • Name : Layout

 Alignment

  • 삽도 참조

 Profile

  • Station : 180.0m, Elevation : 5.4 (종단경사 3%적용)

 Cross Section

  • Default

Step5. Base > Assembly Assign > 선형에 FSM Assembly Unit 할당

  • Base > Assembly Assign

 Select Assembly Unit

  • FSM 선택

 Define Path

  • Whole Layout 선택 후 Select Segment Click 후 전체 Layout 선택

 Assigned List

  • Define Path를 통해 선택 한 후 ADD

Step6. Base > Analysis > Midas Civil 해석 모델 생성

  • Analysis > Size

 Control

  • Select Target : 전체 선택

  • Size Control : Length ; 1.0m

  • Option : Overwrite

  • Analysis > General

 Define

  • Select Member (for 1D element) : Select

  • Select Link : Select

 Property

  • Classification ; Name : Analysis Case-1(Default)

  • 1D Mesh Size ; Method : Length, Length : 1.0m

  • Section Offset ; Center location : Bounding Box Center, Consider Additional Offset (check on)

  • Apply

  • Base > Analysis

 Export

  • Run Midas Civil (Check OFF)

  • Analysis Case List : Analysis Case-1

  • No labels

Copyright © SINCE 1989 MIDAS IT Co., Ltd. All rights reserved.