Summary
Creates 3D Body and Wire Objects of Various Shapes.
How to Run
Ribbon Menu > [Feature] Tab > [Create] Group > Primitive
Explanation
Create a Box Shape 3D Body
This function creates a Box shape 3D Body object.
[Shape]
Enter the dimensions of the Box shape 3D Body.Width(X) : Enter the width of the box object in the X direction.
Width(Y) : Enter the width of the box object in the Y direction.
Height : Enter the height in the Z direction.
[Define Location]
Click the coordinate button to place the box object.
Create a Trapezoidal Box Shape 3D Body
This function creates a Trapezoidal Box shape 3D Body object.
[Shape]
Enter the dimensions of the Trapezoidal Box shape 3D Body.Top Width(X) : Enter the top width of the trapezoidal box object in the X direction.
Top Width(Y) : Enter the top width of the trapezoidal box object in the Y direction.
Bottom Width(X) : Enter the bottom width of the trapezoidal box object in the X direction.
Bottom Width(Y) : Enter the bottom width of the trapezoidal box object in the Y direction.
Height : Enter the height in the Z direction.
[Define Location]
Click the coordinate button to place the trapezoidal box object.
Create a Cylinder shaped 3D Body
This function creates a Cylinder shaped 3D Body object.
[Shape]
Enter the dimensions of the Cylinder shaped 3D Body.Radius : Enter the radius of the bottom surface of the Cylinder object.
Height : Enter the height in the Z direction.
Angle : Enter the angle that is created at the bottom surface of the Cylinder object.
[Define Location]
Click the coordinate button to place the Cylinder object.
Create a Sphere Shaped 3D Body
This function creates a Sphere shaped 3D Body object.
[Shape]
Enter the dimensions of the Sphere shaped 3D Body.Radius : Enter the radius of the Sphere object.
Plane Angle : Enter the angle that is created with the plane.
Altitude Angle(+) : Enter the lattitude angle created in the upper hemisphere.
Altitude Angle (-) : Enter the lattitude angle created in the lower hemisphere.
[Define Location]
Click the coordinate button to place the Sphere object.
Create a Cone Shaped 3D Body
This function creates a Cone shaped 3D Body object.
[Shape]
Enter the dimensions of the Cone shaped 3D Body.Top Radius : Enter the radius of the top surface of the Cone object.
Bottom Radius : Enter the radius of the bottom surface of the Cone object.
Height : Enter the height in the Z direction.
Angle: Enter the angle that is created with the plane.
[Define Location]
Click the coordinate button to place the Cone object.
Create a Spiral Shaped 3D Body
This function creates a Spiral shaped 3D Wire object.
[Shape]
Enter the dimensions of the Spiral shaped 3D Wire Body.Pitch : Enter the height between each layer of the Spiral object.
Turns : Enter the number of turns of the Spiral object.
End Radius : Enter the radius of the top surface of the spiral object.
[Center Point]
Click the coordinate button to set the center point of the spiral bottom surface.[Axis Vector]
Click the Vector Input button and then select the start and end point on the screen to set the direction of the spiral's center axis.[Start Point]
Click the coordinate button and then set the point where the spiral actually starts on the bottom surface of the spiral. This determines the Start Radius of the spiral object.