| Table of Contents |
|---|
Overview of Functions
| Info |
|---|
Define three-dimensional paths (Layout) for modeling infrastructures such as roads, bridges, and tunnels. It defines Defines the shape of alignment and profile respectively and defines the segment segments based on the alignment. The modeled layout can be used to assign to ULT. |
Details of Functions
Create & Edit Tab
Layout list
| Info |
|---|
This function defines a new path or import load information on an existing path. And also created layouts can be selected. layout. |
Classification
| Info |
|---|
This function defines ID and Name of Layout. |
ID: Define the identification number of a layout.
Name: Define the name of a layout.
Location
| Info |
|---|
This function sets where the origin coordinate to put place the layout on the model view. |
Origin-X: Inputs Enter the x-coordinate of the starting point in the alignment.
Origin-Y: Inputs Enter the y-coordinate of the starting point in the alignment.
Initial angle: Inputs Enter the initial angle in the x-y plane to define the direction of the alignment.
Grid Setting
| Info |
|---|
This function sets the grid of the layout that is displayed on the table. |
Main scale: Defines the interval of major gridlines(Default: 10m).
Sub division: Defines the number of divisions between major gridlines(Default: 2).
Layout Editor
Alignment
| Info |
|---|
This table defines an alignment of a path. The picture at the bottom of the table is updated along with the inputted entered value. |
Input Method
By Length: Define an alignment using the length of each section.
By X, Y: Define an alignment using x, y coordinate values (X, Y Coord.) of each section.
By DWG Data: Define an alignment using a 2D CAD file.
Number of Row / Add / Del
Number of Row: Define the number of rows to add at once.
Add: Add a row.
Del: Delete a row.
Table Composition
Type: Select a type of alignment.
- B.P. & E.P.: The beginning point and the end point of the alignment.
- Straight: Define a straight region at the line between a working segment end point and the preceding point.
- Arc: Define a curved region at the line between a working segment end point and the preceding point.
- Clothoid: Define a clothoid region at the line between a working segment end point and the preceding point.X Coord. / Y Coord.: Input Enter values into x and y coordinate of the alignment section. For the 'Straight' type section, Input in the coordinates of the starting point, and for . For the 'Arc' and 'Clothoid' types, Input in the intersection coordinates of the circumference line.
Station: Indicate the station with respect to the working segment end point on the alignment. The station value of 'BP' can be Inputted directly, while the remaining points are automatically calculated by the length of each section.
Length: Input the length between a working segment end point and a preceding point on the alignment.
R: This column is activated when the type of alignment is 'Arc'. Input Enter the radius value of the arc.
Rs / Re: This column is activated when the type of alignment is 'Clothoid'. Input Enter the radius value of the clothoid at the beginning and end.
Profile
| Info |
|---|
This table defines the profile of a path. The picture at the bottom of the table is updated along with the inputted entered value. |
Input Method
By Pos.: Define a profile by applying relative elevation from the start of a path.
Number of Row / Add / Del
Number of Row: Define the number of rows to add at once.
Add: Add a row.
Del: Delete a row.
Table Composition
Station: Input Enter the station with respect to the profile. To facilitate practical work, inputting smaller or larger value than the station of E.P. & B.P. is available.
Elevation: Input Enter the elevation at each station on the profile. Both negative and positive values can be Inputted.
Radius: Input Enter the radius value at the station point on the profile. It is available to input when another station exists at front and back.
Max. R: The maximum radius value that can be Inputted in as 'Radius' value. The maximum radius value is automatically calculated by using the “curve formula for tangent distance”, spacing, as well as the elevation difference.
Cross Section
| Info |
|---|
Layout의 단면의 위치와 타입을 설정하는 테이블입니다This table sets the position and a type of section in a path. |
Number of Row / Add / Del
Number of Row: 한번에 추가할 행의 개수를 입력할 수 있습니다 Define the number of rows to add at once.
Add: 행을 추가할 수 있습니다 Add a row.
Del: 행을 삭제할 수 있습니다 Delete a row.
테이블 구성Table Composition
Name: Segment Point의 이름을 입력합니다Enter the name of the segment point.
Type: Segment Point의 타입을 지정합니다. ‘Support’, ‘Support-Start’, ‘Support-End’, ‘Construction Joint’, ‘Cable Connection Point’, ‘Dividing Point’ 타입이 제공됩니다.Station : Segment Point의 Station 위치값을 입력합니다 Specify the type of the segment point. 'Support', 'Support-Start', 'Support-End', 'Construction Joint', 'Cable Connection Point' and 'Dividing Point' types are given.
Station: Enter the station of the segment point.
Super Elev.: Segment Point의 Supper Elevation값을 입력합니다 Enter the superelevation of the segment point.
Skew: Segment Point의 Skew값을 입력합니다 Enter the skew of the segment point.
Align type
- Tangential: Segment Point에서의 Profile plane 방향이 선형 Layout과 연직하도록 지정합니다Specify that the Profile plane direction at the Segment Point is perpendicular to the alignment layout.
- Parallel: Segment Point에서의 Profile plane 방향이 Global z축과 평행하도록 지정합니다Specify that the Profile plane direction at the Segment Point is parallel to the global z-axis.Label On/Off: Segment Point의 Label 활성화 여부를 지정합니다 Specify whether to activate the Label of Segment Point.