Table of Contents

Feature Summary

Info

[Shortcut Command : RST]

This is the function Feature to set the expression style of the rebar. Through this setting, you the user can turn on/off the expression in the visible range of line or point type reinforcing barsrebars, and you can also set various expression methods such as double line, single line, fill, and layer.

Image Added

Function

Feature Explanation

Generate Drawing >

INFRA-DESIGN> Style > Rebar Style

General

Tap

Image Removed

Style Settings

Image Removed

Image Added

General Style Settings

Show Point Type Rebar in Visible Range

: If the cut section and the rebar are not positioned vertically as shown in the figure below, the section cut by the visible range is expressed as a point, and the rebar included in the visible range is expressed as a line. If this option is turned off, only points are displayed in the visible range of the relevant rebar without expressing the line.

: When linking a section view in CIM, rebars placed in the longitudinal direction based on the actual cut section are displayed as point rebars.
At this time, this is an option that allows you to set all point reinforcement included within the visible range to be displayed in the cross section.
Image Added
Show Line Type Rebar in Visible Range

: Among the rebars that do not intersect the cutting surface of the Cutting Box, the rebars in the Cutting Box are expressed in the form of a line. If this option is turned off, the line reinforcing bars expressed

: When linking section views in CIM, rebars placed in the same plane (transverse direction) based on the actual cut section are displayed as line rebars.
At this time, this is an option that can be set so that all line rebars included within the visible range are

not displayed. In this case, only rebars that are on the same plane as the cutting plane of the Cutting Box are displayed

displayed in the section.
Group Rebar Type

: Set the expression method

: There are five options to set the appearance of rebars arranged in groups.
① If All is

set

selected, all group

reinforcing bars

rebars are displayed.

If you select

② If the user selects First, only the first

reinforcing bar

rebars in the group

is

are displayed.

If you select

③ If the user selects Last, only the last

reinforcing bar

rebars in the group

is

are displayed.

If you select

④ If the user selects First and Last, only the two

bars

rebars at the beginning and end of the group are displayed.

If you select

⑤ If the user selects Center, only the

reinforcing bars

rebars in the center of the group are displayed.
If

you want

the user wants to display only the selected rebar in the group,

you

the user can display only the selected rebar through the

Generate Drawing > Style

INFRA-DESIGN > Rebar Group Setting

function

feature.
Point Type Rebar
: Set the expression method of the Point Type rebar.
① Select Outline to display it in the form of a hollow circle.

If you select Filled Circle, it is expressed

② Select Filled Circle to express the point rebar as a circle filled with the color according to the setting of the Pattern Tap.

If you select

③ Select Circle by 3 Layers

,

to express it

is expressed

as three circles that gradually become smaller.
Line Type Rebar
: Set the expression method of the Line Type rebar.

If you select

① Select Single Line,

reinforcing bars are displayed with one

to display rebars as a single line.

If you select Double Line, the reinforcing bar is displayed as a double line

② Select Double Line to display rebars as double lines reflecting the actual thickness of the

reinforcing bar

rebars that

is

are not filled with a

pattern

Pattern.

If

③ Select Filled Double Line

is selected,

to display the rebars as filled, reflecting the actual thickness of the

rebar is reflected and the rebar filled with the color

rebars and colored according to the

setting

settings in the Pattern

Tap is displayed. If you select

tab.
④ Select Double Line with Center Line

, the bars are displayed

to display rebars as double lines along with the center line of the

bars

rebars.
⑤ Select Filled Double Line with Center Line to display

the reinforcing bars

rebars of the filled double line with the center line.

Image Removed

Image Added
Splice Symbol : Sets the method of displaying splices when there are splices in Line Type

reinforcing bars

rebars.

Image Removed

Image Added
Use Rebar Color and Layer by Diameter
:

This is used

Used to specify the color of the rebar for each rebar diameter.

You

The user can use custom

color

colors or random

color

colors.

Line Style

Tap

Settings

Image Added

Line Style Settings

Line Type Rebar
: Defines the line color, line style, and layer of the Line Type rebar.
Point Type Rebar
: Defines the line color, line style, and layer of the Point Type rebar.
Visible Range Line Type Rebar
: Defines the line color, line style, and layer of the Line Type rebar included in the visible range.
Visible Range Point Type Rebar
: Defines the line color, line style, and layer of the Point Type rebar included in the visible range.
Rebar Center
: Set the color of the center line of the rebar.

Pattern

Tap

Image Removed

Style Settings

Image Added

Pattern Style Settings

Line Type Rebar
: Set the fill color and layer of the line type rebar.
Point Type Rebar
: Set the fill color and layer of the point type rebar

with the Point Type

.

Versions Compared

Old Version 3

New Version Current

Key

Feature Summary

Function

Feature Explanation