Versions Compared

Old Version 3

changes.mady.by.user 이혜연 (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user 박상렬(Dwayne)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents

Feature

...

Summary

Info

Drafter CAD ID has two modes : CIM View Mode and CAD View Mode.

[Important]

CIM View Mode is a mode where that allows you can to check the section view connected to CIM. In CAD Mode, you can refer to the view of CIM Mode to do
At this time, the cross-section linked in CIM is managed through the work tree, and CAD ID exclusive functions can be used through the INFRA-DESIGN tab.
As the mode changes, CAD general functions are disabled and use of the function is limited.

CAD View Mode is a mode in which you can perform CAD work or new 2D CAD work .

...

by referring to the view of CIM Mode. (Can be used the same as general CAD.)
At this time, the function of the INFRA-DESIGN tab in CIM View Mode is disabled.

Feature Explanation

Mode Switch Method

  • Tree window arrangement in CIM Mode

...

  • Tree window arrangement in CAD Mode

...

Info

Double-click the desired view in the CIM View Tree or CAD View Tree, or enter the Changemode command in the Command window, select the desired mode number, and enter the view group name to move to the corresponding view group in the mode.

  • CIM View Mode
    : A tree that displays the view related to the CIM in CIM Mode.

  • CAD View Mode
    : A tree that displays the view in CAD mode.

  • Properties
    : This is a A window that displays the property information of CAD objects.

  • Object
    : A Tree that displays the Member List of the selected View. You The user can show or hide the desired object through this tree, and this setting is maintained even when the view is updated.

  • CAD Elements Draw Lib.
    : This is a tree that collects CAD elements that can effectively utilize 2D CAD.

...

  • Tree window arrangement in CAD View Mode

...

Info

When turning on or off a window on the screen, you can select and apply items in the Tools tab > Worktree.
Properies Ctrl+1 / Window Ctrl+2 / Info-Tag Ctrl+3 / Draw Lib. Ctrl+4

Notice

Note

Even if CIM Mode has the same interface as CAD Mode, CAD Mode functions features can be used very limitedly.
In CIM Mode, only the following CAD functions are available.

  • Line : This is a CAD function that draws a straight line.

  • Dist : CAD function to measure distance.

  • Area : CAD function to measure the area.

  • Angle : CAD function to measure angle.

  • Radius : A CAD function that measures the radius.

  • List: This is a A command to open a window to check the details of the Command window and display the information of the selected object.

  • Regen: This is a A CAD function that recalculates the visibility of an object on the current screen.

  • Zoom: CAD function to set the magnification on the current screen.

  • Layer: This is a A command to open the Layer dialog box.

  • Osnap: This is a A command to open the Snap function setting dialog box.

  • Added drawing and editing features
    Copy / Move / Erase / Stretch / Offset / Rotate / Circle / Pline / Xline / Rectang / Draworder / Text