개요
하위 형상을 특정 Path를 따라 추출하여 상위 형상을 생성하는 기능입니다.
실행Summary
This function creates a parent shape by extracting a child shape in a specific direction.
How to Run
Ribbon Menu > [Feature] Tab > [Generate] Group > Sweep
설명
Sweep 기능으로 상위 형상 생성
하위 형상을 특정 Path를 따라 추출하여 상위 형상을 생성합니다.
Explanation
Create a Parent Shape Using the Sweep Feature
Sweep the child shape along a specified path to create a parent shape.
[Selection Filter]
Sweep 기능에 사용할 Target의 종류를 선택합니다Select the type of the target to use when using the Sweep feature.
Info |
---|
참고 - 속성 정보에 따른 객체 분류 Reference - Object classification according to property information (Body / Member) |
[Select Target]
Target 객체를 선택합니다. Selection Filter에 해당하는 객체만 선택 가능합니다Select the target object. Only objects in the Selection Filter can be selected.[Select Path]
Sweep 경로를 선택합니다. 겹치거나 교차하지 않는 연속된 Edge를 선택할 수 있습니다.[Edit Path]
추출 경로에 대해 부가적인 설정을 합니다.Edit Start Point : 참조할 경로 상에서 참조를 시작할 시작점을 설정합니다.
Reverse Direction : 경로를 참조해 형상을 생성할 경로의 방향을 반대로 설정합니다Edit Start Point : Sets the start point to use as a reference for the path.
Reverse Direction : Reverses the direction of the path.
Select the sweep path. Consecutive edges that do not overlap or intersect can be selected.
Expand | ||
---|---|---|
| ||
[Protrusion Sweep Length]
추출할 거리를 입력합니다. 경로의 최대 길이 이상 입력할 수 없습니다.[Twist Angle]
추출 끝 단면을 추출 시작 단면에 대비해 입력한 값 만큼 회전시켜 추출합니다.
Expand | ||
---|---|---|
| ||
[Keep Target Orientation]
On일 때 Target 단면의 방향을 경로에 대해 상대적인 방향으로 설정합니다.
Expand | ||
---|---|---|
| ||
Enter the sweep length. The length cannot be greater than the maximum length of the path.
[Sweep Lock]
Select how to constrain the cross section that creates the feature.Sweep Lock Type : Select the constraint method to create the shape.
Direction Locking : Locks the axis to set the position(angle) of the plane on which the cross section that creates the shape is placed based on the tangential direction of the path.
Plane Locking : Creates the shape for the section along the path by locking all axes of the plane based on the Global-Axis.
Lock Option : Select the locking method for the direction(axis).
None : No axes are constrained.
Direction : Creates a shape for a section along a path by fixing one axis of the plane. That is, it only allows rotation of sections on planes.
Path & Direction : Creates a shape for a section along a path by fixing one axis of the plane.
Lock Direction : Select how to set the lock direction.
Auto : Apply the direction vector as (0, 0, 1).
By Direction : Apply the direction vector input by the user.
By Plane : Apply the normal vector of the plane.
Vector : Enter the direction vector value.
Plane Setting : Sets the plane for setting the direction. Uses the plane's normal vector as the axis.
[Twist Angle]
Extract the extraction end section by rotating it as much as the user enters for the extraction start section.
Expand | ||
---|---|---|
| ||