개요
객체 간의 거리에 대한 고정 치수를 생성합니다.
Summary
Create fixed dimensions for distances and angles between objects.
How to Run
[User Section Mode]
Ribbon Menu > [User Section] Tab > [Parametric Tools] Group > Dimension
Explanation
Create Dimension (Linear)
생성Parametric 기능으로 단면 형상에 변화를 주는 과정에 사용할 고정 치수를 생성합니다. X 축 또는 Y 축 방향으로의 고정 치수를 생성합니다Use the parametric feature to create fixed dimensions to use in the process of changing the section geometry. This creates a fixed dimension in the X-axis or Y-axis direction.
[Dimension Type]
Linear 타입 : X축 또는 Y축과 평행한 방향으로의 고정 치수Type : Fixed dimensions in a direction parallel to the X-axis or Y-axis.Direction
치수의 생성 방향을 설정합니다Sets the direction in which dimensions are created.Horizontal : X축 기준의 수평 방향
Vertical : X축 기준의 수직 방향
치수의 값을 변경할 때 단면 형상이 변경되는 방향을 설정합니다Horizontal direction with respect to the X-axis.
Vertical : Vertical direction with respect to the X-axis.
Variation
Sets the direction in which the section shape changes based on the changes in the dimension values.Start to End : Target 1의 위치는 고정되고 Target 2의 위치가 변화함1 position is fixed and Targe 2 position changes.
End to Start : Target 2의 위치는 고정되고 Target 1의 위치가 변화함2 position is fixed and Targe 1 position changes.
[Select Target]
치수 생성의 대상 객체Select the target objects (Reference Line, Edge, Vertex) 를 화면에서 선택합니다to create dimension for on the screen.
Expand | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
Target 1의 선택에 따른 Target 2의 선택 가능 대상은 아래와 같습니다2 can be selected according to the Target 1 as shown below.
|
Dimension (Aligned) 생성
|
Create Dimension (Aligned)
Use the parametric feature to create fixed dimensions to use in the process of changing the section geometry. This creates a fixed dimension in the direction of the shortest distance between two targets.
[Dimension Type]
Variation
Aligned 타입 : X축 또는 Y축과 평행하지 않은 방향으로의 고정 치수.
치수의 값을 변경할 때 단면 형상이 변경되는 방향을 설정합니다Type : Fixed dimensions in a direction not parallel to the X-axis or Y-axis.
Variation
Sets the direction in which the section shape changes based on the changes in the dimension values.Start to End : Target 1의 위치는 고정되고 Target 2의 위치가 변화함1 position is fixed and Targe 2 position changes.
End to Start : Target 2의 위치는 고정되고 Target 1의 위치가 변화함2 position is fixed and Targe 1 position changes.
[Select Target]
치수 생성의 대상 객체Select the target objects (Reference Line, Edge, Vertex) 를 화면에서 선택합니다to create dimension for on the screen.
Expand | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||
Target 1의 선택에 따른 Target 2의 선택 가능 대상은 아래와 같습니다2 can be selected according to the Target 1 as shown below.
|
Create Dimension (Radial)
생성Parametric 기능으로 단면 형상에 변화를 주는 과정에 사용할 고정 치수를 생성합니다. Arc 형상 Edge의 반경을 고정 치수로 설정합니다Use the parametric feature to create fixed dimensions to use in the process of changing the section geometry. Sets the radius of the arc shaped edge as a fixed dimension.
[Dimension Type]
Radial 타입 : 반지름의 고정 치수Type : Fixed dimension of the radius.[Select Target]
Select the target objects to create dimension for on the screen. Only arc shaped edges can be selected.
Create Dimension (Angle)
Use the parametric feature to create fixed dimensions to use in the process of changing the section geometry. Sets the angle between the two lines as a fixed dimension.
[Dimension Type]
Angle Type : Fixed dimension of the angle.[Select Target]
치수 생성의 대상 객체를 화면에서 선택합니다. Arc 형상의 Edge만 선택 가능합니다.
참고자료
파라미터 연동 및 형상 변경Select the target objects to create dimension for on the screen. Only edges can be selected.