개요
객체를 Offset 거리만큼 떨어진 지점에 복사 생성합니다.
실행Summary
Create a copy of the object at an offset distance.
How to Run
Ribbon Menu > [Edit] Tab > [Translate] Group > Offset
Explanation
Offset
기능선택한 객체에 Offset을 넣어 복사 생성하는 기능입니다Feature
A feature that creates a copy by applying an Offset to the selected object.
[Selection Filter]
선택할 타겟 객체의 종류를 선택합니다. Edge 선택 시 Edge만 선택할 수 있도록 필터가 작동됩니다Select the type of the target object. When selecting an edge, the filter works so that only the edge can be selected.
Info |
---|
참조 Reference - 점Definitions of Point, 선, 면 요소의 용어 정의Line, and Plane Elements |
[Select Target]
Offset 거리를 넣어 복사 생성할 타겟 객체를 선택합니다Select the target object to be copied by putting an Offset distance.
Expand | ||
---|---|---|
| ||
복사 생성할 Target 객체의 종류를 설정합니다Set the type of the Target object to be copied.
Edge 를 Offset 거리만큼 떨어진 지점에 복사 생성합니다Create a copy of the edge at a location that is offset by an Offset distance.
Face를 Offset 거리만큼 떨어진 지점에 복사 생성합니다Create a copy of the face at a location that is offset by an Offset distance.
1D Member를 Offset 거리만큼 떨어진 지점에 복사 생성합니다Copy and create a 1D Member at a location that is offset by an Offset distance.
2D Member를 Offset 거리만큼 떨어진 지점에 복사 생성합니다Copy and create a 2D Member at a location that is offset by an Offset distance. |
[Distance]
Enter the Offset 거리를 입력합니다distance.
Expand | ||
---|---|---|
| ||
Selection Filter에서 타겟 객체로 Edge나 1D Member를 선택하였을 경우 활성화되는 블록으로, 복사 생성된 객체가 놓이는 평면을 선택할 수 있습니다.
평면을 선택하지 않을 경우, Target 객체가 놓인 평면과 동일 평면 상에 복사 생성됩니다.
평면을 정의한 경우, 정의한 평면의 방향으로 Offset이 적용되어 복사 생성됩니다This block is activated when an Edge or a 1D Member is selected as the target object in the Selection Filter. The user can select the plane on which the copied object is placed.
If no plane is selected, a copy is created on the same plane as the plane on which the target object is placed.
If a plane is defined, an offset is applied in the direction of the defined plane to create a copy. |
Expand | ||
---|---|---|
| ||
|