Summary
Slope Profile을 편집합니다Editing the Slope Profile individually or collectively.
How to Run
[Model Base Mode]
Ribbon Menu > [Model] Tab > [Terrain] Group > Surface > Slope Profile
설명
Slope Profile Surface
Slope Profile을 선택하여 편집합니다.
[Slope] Group > Modify
Explanation
Selecting the Type of the Slope Profile.
[Select Slope Profile]
편집할 Profile을 선택합니다.
Cut Profile 선택 시
Cut Profile을 편집합니다.
[Edit Slope Profile]
Cut Slope 의 Profile을 편집합니다.[Profile]
생성된 단수의 한계 높이 및 사면 관련 항목을 편집할 수 있습니다.
Info |
---|
Slope 생성 시 지층을 선택하여 생성하였으면 Additional Slope Tab에서 수정합니다. |
Slope 생성시 설정한 Slope 값을 변경할 수 있습니다. 지층에 대응하는 Slope 값입니다.
Fill Profile 선택 시
Fill Profile을 편집합니다.
[Edit Slope Profile]
Fill Slope 의 Profile을 편집합니다.[Profile]
생성된 단수의 한계 높이 및 사면 관련 항목을 편집할 수 있습니다.
Info |
---|
Fill Slope는 지층 관련 수정이 없습니다. 지표면 위로 생성되기 때문입니다. 노상/노체 관련 수정은 Subgrade Tab에서 수정합니다. |
Slope 생성 시 설정한 노체/노상의 깊이면 경사를 변경할 수 있습니다.
Selecting the Slope Profile.
Info |
---|
When single profile is selected, all information about the profile is displayed in a table. |
[Slope Preset]
Importing pre-defined Slope Preset information.
Info |
---|
With the information imported through a pre-defined Preset, individual or collective modifications can be made to the selected Slope Profile. |
[Preview]
Preview the slope profile to be modified.