• Vertical Wall : Creates a vertical wall member of the vertical type.

• General Wall : Creates a concrete wall member of the general type.

Displayed only when it is a Vertical Wall

Vertical Wall

• Line(2 points) : Inputs two points to create a line.

• Arc(2 points + Angle) : Creates an arc using two points and a center angle.

• Arc(2 points + Radius) : Creates an arc using two points and a radius.

• Arc(Three points) : Creates an arc using three points.

• Arc(Tangent) : Creates an arc in the direction of contact with a 1D object (Line, Arc).

• Spline(Interpolation) : Input a number of points on the spline and create a curve using a separate polynomial for each section.

• Spline(Control Point) : Creates a curve using a separate polynomial for each section by inputting the spline's starting point, control point, and end point.

• Semi-Ellipse : Creates a semi-ellipse by inputting the center of the ellipse, the point along the major axis, and the point along the minor axis.

• By Select(Edge) : Select the edge directly.

General Wall

• Point(Single Point) : Create a point by inputting one point.

• Point(Center of points) : Create a point in the center of the inputted sub-points.

• Line(2 points) : Inputs two points to create a line.

• Arc(2 points + Angle) : Creates an arc using two points and a center angle.

• Arc(2 points + Radius) : Creates an arc using two points and a radius.

• Arc(Three points) : Creates an arc using three points.

• Arc(Tangent) : Creates an arc in the direction of contact with a 1D object (Line, Arc).

• Spline(Interpolation) : Input a number of points on the spline and create a curve using a separate polynomial for each section.

• Spline(Control Point) : Creates a curve using a separate polynomial for each section by inputting the spline's starting point, control point, and end point.

• Semi-Ellipse : Creates a semi-ellipse by inputting the center of the ellipse, the point along the major axis, and the point along the minor axis.

• Rectangle(Center point 1) : Creates a rectangle by inputting the center and one vertex of the rectangle.

• Rectangle(Center point 2) : Creates a rectangle by inputting the center of the rectangle and the two corner center points.

• Rectangle(Corner two points) : Creates a rectangle by inputting two points diagonally.

• Rectangle(Corner three points) : Creates a rectangle by inputting three vertices.

• Circle(Ceneter point) : Create a circle by inputting a point on the center and perimeter of the circle.

• Circle(Three points) : Create a circle by inputting three points on the perimeter of the circle.

• Ellipse(Center point) : Create a circle by inputting the center of the ellipse, a point in the major axis direction, and a point on the perimeter.

• Ellipse(Corner point) : Creates an ellipse by inputting two points along the major axis of the ellipse and a point on the perimeter.

• Track(Center Point) : Create a track by inputting two points on the track's center and perimeter.

• Track(Corner Point) : Create a track by inputting two points on the center and perimeter.

• Polygon(Circumscribed) : Creates a polygon tangent to a circumscribed circle.

• Polygon(Inscribed) : Creates a polygon tangent to an inscribed circle.

• By Select(Edge) : Select the edge directly.

• By Select(Plane) : Select the face directly.

Displayed only when it is a General Wall

• Member With Solid : This is the Preview shape which shows both the centerline of the Member as well as its Solid shape.

• Member only : This is the Preview shape which shows only the centerline of the Member.

• Member type : civil과의 연동 시 부재의 해석 타입을 선택합니다Select a type of analysis for interface with midasCivil.

• Work type : Select the work type.

• Material : Select the material.