| Table of Contents |
|---|
기능 개요
| Info |
|---|
생성된 Curve Library를 작업평면의 선 객체 또는 선형 Layout에 할당하는 기능입니다. |
Overview of Functions
| Info |
|---|
This function assigns a curve library created into a line object or an alignment on the work plane. |
Details of Functions
Assign Tab
Library list
| Info |
|---|
프로젝트 내 정의된 Curve library List를 나타냅니다This function shows the curve library list defined in the project. |
Assign library
| Info |
|---|
Curve library를 할당할 방식을 선택합니다This function selects the method to assign a curve library. |
By Layout: 선형 Layout에 할당합니다. 할당된 Curve library는 선형 Layout의 형상 업데이트 사항이 반영됩니다Assign a curve library to alignment in a layout. The assigned Curve library will be updated to reflect the shape of the alignment in the layout.
By Select: 일반 Line에 할당합니다Assign a curve library to a line object.
By Draw: 일반 Line을 Draw하는 동시에 해당 Line에 할당합니다. Draw 기능은 Sketch 기능 중 일부가 제공됩니다.Layoutwise : 체크 On 시 선택한 Layout 전체를 하나의 선으로 선택 및 할당합니다Draw a line and at the same time assigns a curve library to that line. The draw function comes with some of the sketch functions.
Layoutwise: If it is checked on, the whole alignment will be selected as one line and a curve library will be assigned to that line.
Alignment
| Info |
|---|
Curve library와 할당할 선 객체와의 구속 관계Define the constraint relationship(Offset, Rotation) 를 정의합니다between a Curve library and a line object that will be assigned. |
Options
Assign library > The options below are activated when ‘Assign library> By Layout 또는 By Select 선택 시 활성화or By Select’ is selected.
- From Start: 순방향(시점 to 종점)으로 할당합니다Assign a curve library in a forward direction (from the start to the end).
- From End: 역방향(종점 to 시점)으로 할당합니다Assign a curve library in a backward direction (from the end to the start).Offset-y: 할당할 선을 기준으로 Y축 Offset 값을 적용합니다Apply offset value in the y-axis based on the line to assign.
Offset-z: 할당할 선을 기준으로 Z축 Offset 값을 적용합니다Apply offset value in the z-axis based on the line to assign.
Rotation-x: x축 방향(할당 선 객체의 진행방향)에 대한 회전 각을 입력합니다Input the rotation angle in the x-axis(Based on the positive direction of a line object to be assigned).
Rotation type
- All: Cuve library의 각 객체별 Offset curve와 Single curve constraint의 Beta angle 모두 회전합니다Rotate all Beta angles of offset curves and single curve constraints in each object respectively.
- Rot. Offset: Curve library의 각 객체 별 Offset curve만 회전합니다Only rotate the offset curve for each object in a curve library.
- Rot. Obj.: Single curve constraint의 Beta angle만 회전합니다Only rotate the Beta angles of the single curve constraint.
Preview level
| Info |
|---|
할당 되기 전 작업평면 상에 나타나는 Preview의 수준을 선택하는 기능입니다This function selects the level of Preview that appears on the work plane before it is assigned. |
Bounding Box - All : 선택된 모든 객체를 감싸는 최소 크기의 박스 형태가 Preview 됩니다.The shape of the smallest box that wraps all selected objects is Previewed.
Bounding Box - Each : 선택된 객체를 각각 감싸는 최소 크기의 박스 형태가 Preview 됩니다.The shape of the smallest box that wraps each selected object is Previewed.
Original Model : 원본 형상과 동일한 Preview가 표출됩니다.Preview same as the original shape is displayed.