| Table of Contents |
|---|
Overview of Functions
| Info |
|---|
Define three-dimensional paths(Layout) for modeling infrastructures such as roads, bridges, and tunnels. It defines the shape of alignment and profile respectively and defines the segment based on the alignment. The modeled layout can be used to assign to ULT. |
Details of Functions
Create & Edit Tab
Layout list
| Info |
|---|
This function defines a new path or import information on an existing path. And also created layouts can be selected. |
Classification
| Info |
|---|
This function defines ID and Name of Layout. |
ID: Define the identification number of a layout.
Name: Define the name of a layout.
Location
| Info |
|---|
This function sets where to put the layout on the model view. |
Origin-X: Inputs the x-coordinate of the starting point in the alignment.
Origin-Y: Inputs the y-coordinate of the starting point in the alignment.
Initial angle: Inputs the initial angle in the x-y plane to define the direction of the alignment.
Grid Setting
| Info |
|---|
This function sets the grid of the layout that is displayed on the table. |
Main scale: Defines the interval of major gridlines(Default: 10m).
Sub division: Defines the number of divisions between major gridlines(Default: 2).
Layout Editor
Alignment
| Info |
|---|
This table defines an alignment of a path. The picture at the bottom of the table is updated along with the inputted value. |
Input Method
By Length: Define an alignment using the length of each section.
By X, Y: Define an alignment using x, y coordinate values(X, Y Coord.) of each section.
By DWG Data: Define an alignment using a 2D CAD file.
Number of Row / Add / Del
Number of Row: Define the number of rows to add at once.
Add: Add a row.
Del: Delete a row.
Table Composition
Type: Select a type of alignment.
- B.P. & E.P.: The beginning point and the end point of the alignment.
- Straight: Define a straight region at the line between a working point and the preceding point.
- Arc: Define a curved region at the line between a working point and the preceding point.
- Clothoid: Define a clothoid region at the line between a working point and the preceding point.X Coord. / Y Coord.: Input values into x and y coordinate of the alignment section. For the 'Straight' type section, Input in the coordinates of the starting point, and for the 'Arc' and 'Clothoid' types, Input in the intersection coordinates of the circumference line.
Station: Indicate the station with respect to the working point on the alignment. The station value of 'BP' can be Inputted directly, while the remaining points are automatically calculated by the length of each section.
Length: Input the length between a working point and a preceding point on the alignment.
R: This column is activated when the type of alignment is 'Arc'. Input the radius value of the arc.
Rs / Re: This column is activated when the type of alignment is 'Clothoid'. Input the radius value of the clothoid at the beginning and end.
Profile
| Info |
|---|
Layout의 종단 선형을 정의하는 테이블입니다. 입력값에 따라 테이블 하단의 그림이 업데이트 됩니다This table defines the profile of a path. The picture at the bottom of the table is updated along with the inputted value. |
Input Method
By Pos.: Layout의 시작점으로부터 상대 위치값을 적용해 종단선형을 정의합니다Define a profile by applying relative elevation from the start of a path.
Number of Row / Add / Del
Number of Row: 한번에 추가할 행의 개수를 입력할 수 있습니다 Define the number of rows to add at once.
Add: 행을 추가할 수 있습니다 Add a row.
Del: 행을 삭제할 수 있습니다 Delete a row.
테이블 구성Table Composition
Station: 종단 선형에 대한 Station 위치를 입력합니다. 실무 편의성을 고려하여 B.P. 와 E.P.의 Station 값보다 작거나 큰 값도 입력 가능합니다.
Elevation : 종단 선형 Station의 높이 값을 입력합니다. 음수와 양수값 모두 입력 가능합니다.
Radius : 종단 방향에 대한 반경값을 입력합니다. 해당 Station의 전후로 다른 Station이 존재하는 경우 입력 가능합니다.
Max. R : ‘Radius’값으로 입력 가능한 최대 반경값을 나타냅니다. 최대 반경값은 전후의 Station 간격 및 고저차 등과 ‘접선장 공식’을 이용하여 자동 산정됩니다 Input the station with respect to the profile. To facilitate practical work, inputting smaller or larger value than the station of E.P. & B.P. is available.
Elevation: Input the elevation at each station on the profile. Both negative and positive values can be Inputted.
Radius: Input the radius value at the station point on the profile. It is available to input when another station exists at front and back.
Max. R: The maximum radius value that can be Inputted in as 'Radius' value. The maximum radius value is automatically calculated by using the “curve formula for tangent distance”, spacing, as well as the elevation difference.
Cross Section
| Info |
|---|
Layout의 단면의 위치와 타입을 설정하는 테이블입니다. |
Number of Row / Add / Del
Number of Row : 한번에 추가할 행의 개수를 입력할 수 있습니다.
Add : 행을 추가할 수 있습니다.
Del : 행을 삭제할 수 있습니다.
테이블 구성
Name : Segment Point의 이름을 입력합니다.
Type : Segment Point의 타입을 지정합니다. ‘Support’, ‘Support-Start’, ‘Support-End’, ‘Construction Joint’, ‘Cable Connection Point’, ‘Dividing Point’ 타입이 제공됩니다.
Station : Segment Point의 Station 위치값을 입력합니다.
Super Elev. : Segment Point의 Supper Elevation값을 입력합니다.
Skew : Segment Point의 Skew값을 입력합니다.
Align type
- Tangential : Segment Point에서의 Profile plane 방향이 선형 Layout과 연직하도록 지정합니다.
- Parallel : Segment Point에서의 Profile plane 방향이 Global z축과 평행하도록 지정합니다.Label On/Off : Segment Point의 Label 활성화 여부를 지정합니다.