개요
라이브러리 공간의 진행 방향으로 추가적인 경로(Main Constraint Path)를 생성합니다.
Main Constraint Path의 시작과 끝 점은 생성 과정에서 선택한 Constraint Plane에 구속됩니다.
실행
[Curve Library Mode]
Ribbon Menu > [Curve Library] Tab > [Constraint Entity] Group > Path
[Assembly Unit Mode]
Ribbon Menu > [Assembly Unit] Tab > [Constraint Entity] Group > Path > Main Path
설명
By Point 방법
Default Constraint Path의 영역 안에서 Constraint Plane이 배치되는 위치를 입력하여 생성하는 방법입니다.
Main Constraint Path 생성
라이브러리의 진행 방향으로 추가적인 경로를 생성하는 기능입니다.
[Method]
By Point를 선택합니다Constraint Plane]
두 개 이상의 Constraint Plane 을 선택하여 Main Constraint Path 의 구간을 설정합니다.[LocationOffset]
Default Constraint Path의 영역 안에서 Constraint Plane이 배치되는 위치를 입력합니다.
Info |
---|
오른쪽의 버튼을 클릭한 후 화면에서 Default Constraint Path의 특정 위치를 클릭하면, 값이 자동으로 입력됩니다. |
[Alignment]
Default Constraint Path의 길이 변화에 따른 Constraint Plane 위치의 계산 방법을 설정합니다.
title | 상세 설명 (By Alignment) |
---|
[Skew]
선형(Layout)의 Skew에 따른 Constraint Plane 방향의 회전 여부를 설정합니다.
title | 상세 설명 (Skew) |
---|
By Offset 방법
특정 Constraint Plane으로부터의 이격 거리를 입력하여 생성하는 방법입니다.
영상 삽입
[Method]
By Offset을 선택합니다.[Select Constraint Plane]
Constraint Plane을 선택합니다.[Offset Distance]
선택한 Constraint Plane으로부터의 이격 거리를 입력합니다.
생성되는 Main Constraint Path를 Default Constraint Path로부터 떨어져서 위치시키려할 때, 두 Path 사이의 이격거리를 입력합니다.
Distance (Path-Y) : Y 축 방향으로의 이격거리를 입력합니다.
Distance (Path-Z) : Z 축 방향으로의 이격거리를 입력합니다.
참고자료
참고자료 링크