Overview of Functions
| Info |
|---|
Sets the folds of rebars. Provides Lap, Coupler, Welding type. |
Details of Functions
Create & Edit Tab
Select rebar
| Info |
|---|
Select the rebar to create the lap jointssplice. Reinforcing bars that allow selection are rebars that have gone through arrangement (cross-bars, longitudinal bars, and spiral bars). |
Select : Select the bars to create the lap joints.splice
Splice
| Info |
|---|
Select the type of lap jointssplice. (None, Lap, Coupler, Welding) The options you set depend on the type of selection. |
Splice type : Select the type of lap splice joints.
Lap length : Input the length of the Lap. (Apply when selecting Lap type. Coupler, Welding does not apply.)
Bar length : Input the spacing of the lap splice joints. Lap splice joints are placed repeatedly according to values inputted.
Bar arrangement : Sets the arrangement of the lap joint. You can choose Left-Right or Right-Left. (Apply when selecting Lap type. Coupler, Welding does not apply.)
Alternate length : Arranges lap splice joints in zigzag form. Input the spacing values between lap spice joints 1cycle and 2cycle.
Reverse direction : When activated, reverse the direction of deploying rebar’s lap splice joints.
Table Tab
Select rebar
| Info |
|---|
Select the rebar to create the lap jointssplice. Set the lap joints splice in the Table method. Reinforcing bars that allow selection are rebars that have gone through arrangement. (Cross-bars, longitudinal bars, and spiral bars). |
Select : Select the bars to create the lap jointssplice.
Splice
| Info |
|---|
Set the lap joints splice in the Table method. Set Name, Diameter, Nominal diameter, Splice type, Bar length, Lap length, Alternate length. |
Bar arrangement : Sets the arrangement of the lap joint. You can choose Left-Right or Right-Left.
Name : Displays the name of the selected rebar group.
Diameter : You can change the diameter of the rebar in Sub-group units.
Norminal diameter : The nominal diameter of the rebar selected in 'Diameter' is displayed.
Splice type : Select the type of lap jointssplice.
Bar length : Input the spacing of the lap jointssplice. Lap joints splice are placed repeatedly according to values inputted.
Lap length : Input the length of the Lap. (Apply when selecting Lap type. Coupler, Welding does not apply.)
Alternate length : Arranges lap joints splice in zigzag form. Input the spacing values between lap joints splice 1cycle and 2cycle.