| Table of Contents |
|---|
Overview of Functions
| Info |
|---|
Create a concrete slab member (2D). |
Details of Functions
Create Tab
Draw
| Info |
|---|
Draw a closed surface using the sketch function. |
Point(Single Point) : Create a point by inputting one selecting a point.
Point(Center of points) : Create a point in the center of the inputted selected sub-points.
Line(2 points) : Input select two points to create a line.
Arc(2 points + Angle) : Creates an arc using two points and a center angle.
Arc(2 points + Radius) : Creates an arc using two points and a radius.
Arc(Three points) : Creates an arc using three points.
Arc(Tangent) : Creates an arc in the direction of contact with a 1D object (Line, Arc).
Spline(Interpolation) : Input a number of points on the spline and create a curve using a separate polynomial for each section.
Spline(Control Point) : Creates a curve using a separate polynomial for each section by inputting the spline's starting point, control point, and endpoint.
Semi-Ellipse : Creates a semi-ellipse by inputting the center of the ellipse, the point along the major axis, and the point along the minor axis.
Rectangle(Center point 1) : Creates a rectangle by inputting the center and one vertex of the rectangle.
Rectangle(Center point 2) : Creates a rectangle by inputting the center of the rectangle and the two corner center points.
Rectangle(Corner two points) : Creates a rectangle by inputting two points diagonally.
Rectangle(Corner three points) : Creates a rectangle by inputting three vertices.
Circle(Ceneter point) : Create a circle by inputting a point on the center and perimeter of the circle.
Circle(Three points) : Create a circle by inputting three points on the perimeter of the circle.
Ellipse(Center point) : Create a circle by inputting the center of the ellipse, a point in the major axis direction, and a point on the perimeter.
Ellipse(Corner point) : Creates an ellipse by inputting two points along the major axis of the ellipse and a point on the perimeter.
Track(Center Point) : Create a track by inputting two points on the track's center and perimeter.
Track(Corner Point) : Create a track by inputting two points on the center and perimeter.
Polygon(Circumscribed) : Creates a polygon tangent to a circumscribed circle.
Polygon(Inscribed) : Creates a polygon tangent to an inscribed circle.
By Select(Edge) : Select the edge directly.
By Select(Plane) : Select the face directly.
Option
| Info |
|---|
Select the face creation option that accords with the inner hollow area for the closed surface made with the Draw function. When Checked On, creates a Face in which the internal closed area is hollow. |
Preview level
| Info |
|---|
Select the preview exposure level when while creating the draw of the member is not complete. |
Member With Solid : This is the preview shape. It shows both the center line of the member and its solid shape for the preview shape.
Member only : Shows It shows only the center line of the member as for the preview shape.
Property Tab > 1st sub tab
Classification
| Info |
|---|
Sets the properties of a 2D slab member |
Member type : Select a type of analysis for interface with midasCivilmidas Civil.
Work type : Select the work type .
Material : Select the material.
Group
| Info |
|---|
Select a structure group. |
Property Tab > 2nd sub tab
Thickness
| Info |
|---|
Enter the thickness. |
Cardinal point
| Info |
|---|
Sets where to apply the thickness that accords with the members’ Center Plane (Geometry). |
Additional offset
| Info |
|---|
Input an Enter the additional separation distance from the Cardinal point position to the local z direction of the section. |