Versions Compared

Old Version 3

changes.mady.by.user 이근협 (Axel) (Unlicensed)

Saved on

compared with

New Version 4

changes.mady.by.user 박상렬(Dwayne)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents

Feature Summary

Info

[Shortcut Command : SR]

Views in one sheet are pre-arranged using the view of the library of CIM. The view included in the sheet region setting automatically inserts the sheet set in the sheet setting and arranges the view when the library view is automatically created in the Base.

Feature Explanation

Generate Drawing > Sheet Region

Execute the Sheet Region command → select Paper Size → Scale setting → Set the name of the sheet → Arrange the Drawing Sheets.

...

If the Sheet Region area is larger or smaller than the drawing area specified in the sheet, the upper left corner of the Sheet Region is aligned with the drawing area of ​​the sheet.

...

Table of Contents

Summary

...

  • This function sets up the placement of a cross-sectional view drawn in CIM View Mode on a sheet.

  • By defining the sheet area and pre-placing library sections within it, you can save and reuse the corresponding CIM Library file without needing a separate sheet setting process, even when reusing it after exporting and importing.

 

How to Run

...

[CIM View Mode]

  • Ribbon Menu > [INFRA-DESIGN] Tab > Sheet > Sheet Region [SR]

 

Explanation

...

How to Sheet Setting.

The Sheet Region [SR] command can be executed or accessed through the Sheet Region function under the INFRA-DESIGN menu tab.

Sheet Region, Shortcut key : SS

Commentary contents

image-20240703-080924.pngImage Added

  • [Command]
    Run the Sheet Region function from the tree menu or use the command SHEETREGION (SR) in the Command window.

    • Sheet Region feature is applicable only to Views created from the Library.
      (The feature is not executed in the BASE and CAD mode.)

image-20240703-081414.pngImage Added

  • [Command]

    • Paper size [A4(A4)/A3(A3)/ A2(A2)/ A1(A1)/ A0(A0)] <A1> : A1
      (lightbulb) Set the paper size on which to place the single sided section.

    • Page Orientation [Landscape(L)/Portrait(P)] <L> : L
      (lightbulb) Set the paper orientation. (horizontal or vertical)

    • Scale {100} : 1:100

      (lightbulb) Enter a scale value for the sheet.

    • Sheet Name [Option(OP)] : GENERAL DRAWING
      (lightbulb) Enter a name to manage the sheet.
      If not entered, the view area name will be used. Entering Option[OP] will bring up the sheet settings window.

    • Sheet Number [Option(OP)] <001> : 001

      (lightbulb) Enter the number to manage the sheet.

CAD ID Maunal_시트 영역(EN).mp4

  • How to utilize the Sheet Region

① Execute the function.

② Set paper size : A1

③ Set paper orientation : L

④ Set scale : 1:100

⑤ Set Sheet Name : Check and apply in option settings

⑥ Position the sheet.

⑦ Place on the work screen : CAD View Mode New window placed on work screen