개요
객체의 속성창 값을 변경하여 사용자 정의 단면의 형상을 변경합니다.
Summary
Change the values in the object’s property window to change the user-defined section shape.
How to Run
[User Section Mode]
Reference Line
화면에서 Reference Line을 선택Select the reference line on the screen
Dimension
Run Works Tree 실행
Works Tree에 등록되어 있는 Dimension에서 마우스 오른쪽 버튼 클릭
Context Menu의 Property 클릭
설명
Reference Line의 각도 변경을 통한 형상 변경
Reference Line의 각도를 변경하여 단면의 모습을 해당 값에 연동하여 변경합니다Right click on the Dimension in the Works Tree
Click on Property under Context Menu
Explanation
Change the Reference Line Angle to Change the User-Defined Section Shape
Change the reference line angle to change the section shape through interoperability.
[Rotation]
Parameter : 매개변수를 활용하여 단면의 형상을 변경하고자 할 때, 연동 관계를 형성할 매개변수를 설정합니다.
Value : 선택한 Reference Line의 회전 각도를 변경하여 단면의 모습을 해당 값에 연동하여 변경합니다.
Info |
---|
Parameter를 연동한 이후에는 Rotation 블록의 Value를 직접 입력할 수 없습니다. |
Info |
---|
적절하게 Dimension 및 Constraint 조건을 연결한 경우에만 속성창 값 변경을 통하여 단면의 형상을 변경할 수 있습니다. |
Dimension의 치수 값 변경을 통한 형상 변경
To use the parameters to change the section shape, select the section dimensions to parameterize.
Value : Parametrize and change the rotation angle of the reference line to change the section shape.
Info |
---|
After linking the parameters, the value for the rotation block cannot be entered manually. |
Info |
---|
You can change the section shape by changing the values in the property window only if dimension and constraint conditions are appropriately connected. |
Change the Dimension Value to Change the User-Defined Section Shape
Change the dimension value to change the section shape through interoperability.
[Dimension]
Parameter : 매개변수를 활용하여 단면의 형상을 변경하고자 할 때, 연동 관계를 형성할 매개변수를 설정합니다.
Parameter : 선택한 Dimension의 치수 값을 변경하여 단면의 모습을 해당 값에 연동하여 변경합니다.
Info |
---|
적절하게 Dimension 및 Constraint 조건을 연결한 경우에만 속성창 값 변경을 통하여 단면의 형상을 변경할 수 있습니다. |
To use the parameters to change the section shape, select the section dimensions to parameterize.
Parameter : Parametrize and change the selected dimension to change the section shape.
Info |
---|
You can change the section shape by changing the values in the property window only if dimension and constraint conditions are appropriately connected. |