개요
두 Vertex를 사용자가 입력한 강성으로 연결하는 탄성연결요소(Elastic Link)를 생성합니다.
실행Summary
Creates an elastic link that connects two Vertexs with user-entered rigidity.
How to Run
Ribbon Menu > [Model] Tab > [Analysis] Group > Link > Elastic
Explanation
Create Elastic Link
생성Elastic Link를 생성하는 기능입니다Feature that creates elastic link.
[Select Target]
Link가 생성될 두 Vertex를 선택합니다.
1D Member의 Vertex만 선택 가능합니다Select two vertices where link will be created.
Only vertex of 1d member can be selected.[Stiffness]
Elastic Link의 종류를 지정합니다Specify type of elastic link.General : 선형 탄성연결요소. 사용자가 원하는 값을 입력합니다Linear elastic link. Enter user-defined values.
Stiffness-Dx : 요소좌표계 x축 방향 강성Stiffness in x axis direction of element coordinate system
Stiffness-Dy : 요소좌표계 y축 방향 강성Stiffness in y axis direction of element coordinate system
Stiffness-Dz : 요소좌표계 z축 방향 강성Stiffness in z axis direction of element coordinate system
Stiffness-Rx : 요소좌표계 x축에 대한 회전방향 강성Rotational stiffness with respect to x axis of element coordinate system
Stiffness-Ry : 요소좌표계 y축에 대한 회전방향 강성Rotational stiffness with respect to y axis of element coordinate system
Stiffness-Rz : 요소좌표계 z축에 대한 회전방향 강성Rotational stiffness with respect to z axis of element coordinate system
Rigid : 강체연결요소. 해석 호환시 강성매트릭스 내에서 가장 큰 강성의 1e5배의 강성이 입력됩니다Rigid connection element. Analysis compatibility inputs 1e5 times the stiffness of the largest stiffness within the stiffness matrix.
Tension Only : 인장전담 탄성연결요소Tension-specific elastic connections
Compression Only : 압축전담 탄성연결요소
Compression-specific elastic connections