개요
Longitudinal Rebar Group의 분류, 형상, 배치, 수량 설정 등의 속성 정보를 확인, 또는 편집합니다.
실행
화면에서 Longitudinal Rebar Group을 선택.
Summary
View or edit property information for classification, geometry, analysis, quantity settings of the Longitudinal Rebar Group.
How to Run
Select the Longitudinal Rebar Group on the screen.
Explanation
Common Tab
[Classification]
철근 그룹의 분류 속성을 설정합니다Set the classification properties of the rebar group.Name : 철근 그룹의 이름을 입력합니다Enter the name of the rebar group.
Rebar Type : 철근 유형을 출력합니다Displays the rebar type.
Grade : 철근 그룹의 재질을 설정합니다Sets the material grade of the rebar group.
[Specification]
철근 그룹의 제원을 설정합니다Sets the specification of the rebar group.Code : Rebar Specification을 설정합니다Sets the rebar specification.
Diameter : 철근의 직경을 선택합니다. Code가 선택된 경우에만 활성화됩니다Select the rebar diameter. This is enabled only when a code is selected.
Nominal Diameter : 철근의 공칭 직경을 입력합니다Enter the nominal diameter of the rebar.
Bending Radius : 철근의 곡률 반경을 입력합니다Enter the bending radius of the rebar.
Maximum Length : 철근 그룹 내 가장 긴 길이를 갖는 철근의 길이를 출력합니다Displays the length of the longest rebar within the rebar group.
Minimum Length : 철근 그룹 내 가장 짧은 길이를 갖는 철근의 길이를 출력합니다Displays the length of the shortest rebar within the rebar group.
Expand | ||
---|---|---|
| ||
|
Info |
---|
[Hook]
Hook 형상을 설정합니다Set the shape of a hook.Differenct Start/End Hook : 시∙종점의 Hook 설정을 각각 적용할지 여부를 설정합니다Set whether to apply hook settings differently to the start and end point of the hook.
Direction : Hook의 방향을 설정합니다Sets the direction of the hook.
Hook Type : Hook 유형을 선택합니다Select the type of hook.
Angle : Hook의 갈고리 각도를 입력합니다Enter the angle of the hook.
Radius : hook의 곡률 반경을 입력합니다Enter the radius of the hook.
Length : Hook의 길이를 입력합니다Enter the length of the hook.
Expand | ||
---|---|---|
| ||
|
[Offset]
Rebar 양 끝단에서의 연장 길이를 조정합니다Adjust the extension length at both ends of the rebar.Start/End Length : 철근의 시∙종점의 연장 길이를 입력합니다. (+) 값일 경우 짧아지며 (-) 값일 경우 길어집니다Enter the extension length at the start and end of the rebar. Enter a positive (+) value to shorten, and a negative (-) value to extend.
Start/End Spacing : 종철근 배치 시, 시∙종점으로부터 떨어지는 거리를 입력합니다When placing longitudinal rebars, enter the distance from the start and end points.
[Plane Alignment]
Sets the constraint reference point of the Rebar (Start/End) Plane의 구속 기준점을 설정합니다Plane.Ref. Point (Start/End) : Target Member의 Geometric Line 위 시작점 / 중앙점 / 끝점을 선택하여 철근 그룹 재생성 시 정보로 활용합니다Select the starting point/center point/end point above the geometric line of the target member and use when recreating the rebar group.
종철근의 간격을 설정합니다
Expand | ||
---|---|---|
| ||
|
Array Tab
|
Array Tab
[Arrangement]
Set the spacing of longitudinal bars.
Expand | ||
---|---|---|
| ||
|
Expand | ||
---|---|---|
| ||
|
Expand | ||
---|---|---|
| ||
|
[Actual Spacing]
철근이 배열된 실제 간격을 표시합니다Displays the actual spacing used to arrange the rebars.[Splice]
철근 그룹의 이음을 설정합니다Set the splice for the rebar group.
Expand | ||
---|---|---|
| ||
|
[Variable Rebar Name]
철근 그룹 내 이름 규칙을 설정합니다Sets the name rule within the rebar group.Array Group : 배열된 철근 각각의 이름을 다르게 지정합니다Set the name of each arranged rebar differently.
Splice Group : 겹이음 단위로 철근 그룹을 구분하여 이름을 다르게 지정합니다Set the name of each regar group according to the splice group.
Construction Tab
Info |
---|
Reference - Construction Properties |