개요
원하는 위치를 절단해서 볼 수 있는 Cutting View를 설정합니다.
Summary
Set the Cutting View where you can cut and view the desired location.
How to Run
Ribbon Menu > [Model] Tab > [Tools] Group > Cutting View
Explanation
Define Plane
방법선택한 면에 평행한 단면으로 절단하여 Cutting View를 설정합니다Method
Sets the Cutting View by cutting into sections parallel to the selected path.
[Classification]
Cutting View의 ID와 Name을 설정합니다Set the ID and name of cutting view.[Method]
Define Plane을 선택합니다Select the define plane.[Define Plane]
원하는 Cutting 위치 또는 Cutting 위치와 평행한 면을 선택합니다Select the desired cutting position or plane parallel to the cutting position.
| Info |
|---|
참고 Reference - Define Plane |
[Distance]
선택한 Plane으로부터 원하는 Cutting View까지 수직방향으로 떨어진 거리를 설정합니다Sets the vertical distance from the selected plane to the desired Cutting View.[Visible Part]
On 일 때 Cutting View로 나눠진 반대쪽 모델이 화면상에 Show 됩니다When On, the opposite model divided into Cutting View is shown on the screen.
Define Path
방법선택한 경로에 수직한 단면으로 절단하여 Cutting View를 설정합니다Method
Sets the Cutting View by cutting into sections perpendicular to the selected path.
[Classification]
Cutting View의 ID와 Name을 설정합니다Set the ID and name of cutting view.[Method]
Define Path을 선택합니다Select the define path.[Define Path]
원하는 Cutting View에 수직인 Path를 선택합니다Select a path vertical from the desired cutting view.[Distance]
선택한 Path에 수직으로 생성된 Cutting View를 Path 방향으로 설정한 거리만큼 이동시킵니다Moves the Cutting View created perpendicular to the selected Path by the distance set in the Path direction.[Visible Part]
On 일 때 Cutting View로 나눠진 반대쪽 모델이 화면상에 Show 됩니다.
When On, the opposite model divided into Cutting View is shown on the screen.