개요
참조 선을 생성합니다.
Summary
Create a reference line.
How to Run
[User Section Mode]
Ribbon Menu > [User Section] Tab > [Parametric Tools] Group > Ref. Line
Explanation
Origin & Angle
방법참조 선의 원점 좌표와 X축 기준의 회전 각도를 통해 생성하는 방법입니다Method
This is a method to create through the origin coordinates of the reference line and the rotation angle of the X-axis reference.
[Method]
Origin & Angle : 원점과 X축 기준의 회전 각을 입력하여 참조 선을 생성합니다.Offset : 기생성한 참조 선을 선택하고, 해당 참조 선으로 부터 떨어질 이격거리를 입력하여 새로운 참조 선을 생성합니다Enter the angle of rotation between the origin and the X-axis to create a reference line.
Offset : Select an existing reference line and enter a separation distance from that reference line to create a new reference line.
[Rotation Angle]
X축 기준의 회전 각도를 입력합니다Enter the rotation angle based on the x-axis.[Origin Point]
참조 선의 원점이 위치할 곳을 선택하여 새로운 참조 선을 생성합니다Select where the origin of the reference line will be placed to create a new reference line.
Offset
방법선택한 Reference Line으로부터의 이격 거리를 입력하여 생성하는 방법입니다Method
This ia a method to create by entering a separation distance from the selected reference line.
[Method]
Origin & Angle : 원점과 X축 기준의 회전 각을 입력하여 참조 선을 생성합니다.Offset : 기 생성한 참조 선을 선택하고, 해당 참조 선으로 부터 떨어질 이격거리를 입력하여 새로운 참조 선을 생성합니다: Enter the angle of rotation between the origin and the X-axis to create a reference line.
Offset : Select an existing reference line and enter a separation distance from that reference line to create a new reference line.
[Select Reference Line]
기 생성한 Reference Line을 선택합니다Select an exisiting reference line.[Offset Distance]
선택한 참조 선으로부터의 이격 거리를 입력하여 새로운 참조 선을 생성합니다.
Enter the separation distance from the selected reference line to create a new reference line.