개요
하위 형상을 특정 Path를 따라 추출하여 상위 형상을 생성하는 기능입니다.
실행Summary
This function creates a parent shape by extracting a child shape in a specific direction.
How to Run
Ribbon Menu > [Feature] Tab > [Generate] Group > Sweep
설명
Sweep 기능으로 상위 형상 생성
하위 형상을 특정 Path를 따라 추출하여 상위 형상을 생성합니다Explanation
Create a Parent Shape Using the Sweep Feature
Sweep the child shape along a specified path to create a parent shape.
[Selection Filter]
Sweep 기능에 사용할 Target의 종류를 선택합니다Select the type of the target to use when using the Sweep feature.
Info |
---|
참고 - 속성 정보에 따른 객체 분류 Reference - Classification of Objects According to Attribute Information (Body / Member) |
[Select Target]
Target 객체를 선택합니다. Selection Filter에 해당하는 객체만 선택 가능합니다Select the target object. Only objects in the Selection Filter can be selected.[Select Path]
Sweep 경로를 선택합니다. 겹치거나 교차하지 않는 연속된 Edge를 선택할 수 있습니다Select the sweep path. Consecutive edges that do not overlap or intersect can be selected.[Edit Path]
추출 경로에 대해 부가적인 설정을 합니다Set additional settings for the sweep path.Edit Start Point : 참조할 경로 상에서 참조를 시작할 시작점을 설정합니다Sets the start point to use as a reference for the path.
Reverse Direction : 경로를 참조해 형상을 생성할 경로의 방향을 반대로 설정합니다Reverses the direction of the path.
Expand | ||
---|---|---|
| ||
[Protrusion Length]
추출할 거리를 입력합니다. 경로의 최대 길이 이상 입력할 수 없습니다Enter the sweep length. The length cannot be greater than the maximum length of the path.[Twist Angle]
추출 끝 단면을 추출 시작 단면에 대비해 입력한 값 만큼 회전시켜 추출합니다Extract the extraction end section by rotating it as much as you enter for the extraction start section.
Expand | ||
---|---|---|
| ||
[Keep Target Orientation]
On일 때 Target 단면의 방향을 경로에 대해 상대적인 방향으로 설정합니다When set to On, the direction of the target section is set relative to the path.
Expand | ||
---|---|---|
| ||